Install New Lag Bolts in Flat Posts
From How to Fix a Wobbly Outdoor Stair Railing · Step 3 of 5 · Video by The Honest Carpenter

Showing 3:14–3:49 of the source video. Watch the full video with every moment.
What happens in this clip
Once the pilot holes are ready, insert a lag bolt with its corresponding washer into a new pilot hole. Tap the head of the lag bolt lightly with a hammer a few times to help the threads bite into the wood and get set. Then, using the half-inch ratchet wrench with a 3/4-inch socket, begin turning the lag bolt. Tighten it securely until the washer gently bites into the post lumber. Ensure not to overtighten, which could damage the wood. Repeat this process for all flat deck posts requiring reinforcement.
Goal: Install the new lag bolts into the pre-drilled holes, ensuring washers are in place, and tighten them securely with a ratchet wrench for flat railing posts.
What's used
Tools
- Exterior Lag Screws
- Hammer
- Ratchet Wrench
- Socket
- Washers
About the full video
This project details how to reinforce wobbly wooden deck railings by installing new, larger lag bolts and tightening existing fasteners. It addresses common construction shortcuts that lead to unstable railings and provides a practical solution for enhancing safety and stability, including specific instructions for flat and corner posts.
Step 3 of 5: Reinforce Loose Posts
For posts that remain wobbly after tightening fasteners, additional reinforcement is needed. Drill pilot holes from the outside of the post into the adjacent stair stringer or deck framing member. Then, drive long lag screws or carriage bolts through the post and securely into the framing. Use washers under the bolt head and nut to distribute pressure.
Every video in How to Fix a Wobbly Outdoor Stair Railing
Step 1: Inspect the Stair Railing
- 0:00–1:04 Identify Wobbly Railing Issues
- 0:21–0:29 Check Individual Baluster Security
- 0:20–0:28 Check Baluster Security
Step 2: Tighten Loose Fasteners
- 1:07–1:49 Re-secure Loose Deck Screws
- 0:34–0:35 Inspect and Tighten Hardware
- 0:08–0:13 Re-secure Loose Fasteners
Step 3: Reinforce Loose Posts
- 3:14–3:49 Install New Lag Bolts in Flat Posts (this video)
- 5:04–5:17 Install Lag Bolts in Corner Posts
- 2:41–2:51 Countersink and Secure Baluster Post
Step 4: Repair or Replace Damaged Components
- 0:10–0:16 Insert New Wood and Apply Epoxy Filler
- 12:26–12:44 Cut and Install Salvaged Timber
- 0:08–0:13 Install New Wood Reinforcement
Step 5: Test Stability and Finish
- 15:21–16:35 Final Inspection and Finishing Touches
- 0:26–0:33 Final Inspection and Readiness Check
- 8:57–9:08 Prime and Paint Railing
How to Fix a Wobbly Outdoor Stair Railing
This project outlines the steps to diagnose and fix a wobbly outdoor stair railing, ensuring its stability and safety. The process involves identifying the loose connections, reinforcing or replacing components, and testing the railing's sturdiness.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

