Insert New Wood and Apply Epoxy Filler
From How to Fix a Wobbly Outdoor Stair Railing · Step 4 of 5 · Video by HomeGuru dO'S & dONT'S

Showing 0:10–0:16 of the source video. Watch the full video with every moment.
What happens in this clip
Cut a new piece of wood to the exact dimensions of the void created in the previous step, ensuring a snug fit. Before installation, place protective masking paper or tape on the ground directly below the repair area to protect it from dripping filler. Insert the new wood piece firmly into the void. Then, apply a robust two-part epoxy wood filler around the new wood, filling all gaps between the new and old wood, and extending slightly onto the surrounding frame. Wear gloves to keep hands clean and protect them from the epoxy.
Goal: Secure the new wood and seal the repair with filler
What's used
Tools
- Gloves
- New wood piece
- Composite trim
Materials
- Protective masking paper/tape
- Cardboard
- Two-part epoxy wood filler
- Automotive body filler (less ideal for wood)
About the full video
This DIY project focuses on effectively repairing a section of a rotten wooden door frame. It involves systematically removing the deteriorated wood using specialized tools, replacing it with a new piece of wood, meticulously filling and sculpting the area with a durable wood filler or epoxy, and finally sanding and painting for a complete and aesthetically pleasing restoration.
Step 4 of 5: Repair or Replace Damaged Components
For minor cracks or rot, clean out the damaged area and fill with exterior-grade wood filler or epoxy, following the product instructions. For larger sections of rot or broken pieces, remove the damaged component entirely. Measure and cut new wood to match the original dimensions and specifications. Secure new components with appropriate fasteners and exterior-grade wood glue.
Every video in How to Fix a Wobbly Outdoor Stair Railing
Step 1: Inspect the Stair Railing
- 0:00–1:04 Identify Wobbly Railing Issues
- 0:21–0:29 Check Individual Baluster Security
- 0:20–0:28 Check Baluster Security
Step 2: Tighten Loose Fasteners
- 1:07–1:49 Re-secure Loose Deck Screws
- 0:34–0:35 Inspect and Tighten Hardware
- 0:08–0:13 Re-secure Loose Fasteners
Step 3: Reinforce Loose Posts
- 3:14–3:49 Install New Lag Bolts in Flat Posts
- 5:04–5:17 Install Lag Bolts in Corner Posts
- 2:41–2:51 Countersink and Secure Baluster Post
Step 4: Repair or Replace Damaged Components
- 0:10–0:16 Insert New Wood and Apply Epoxy Filler (this video)
- 12:26–12:44 Cut and Install Salvaged Timber
- 0:08–0:13 Install New Wood Reinforcement
Step 5: Test Stability and Finish
- 15:21–16:35 Final Inspection and Finishing Touches
- 0:26–0:33 Final Inspection and Readiness Check
- 8:57–9:08 Prime and Paint Railing
How to Fix a Wobbly Outdoor Stair Railing
This project outlines the steps to diagnose and fix a wobbly outdoor stair railing, ensuring its stability and safety. The process involves identifying the loose connections, reinforcing or replacing components, and testing the railing's sturdiness.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

