Cut and Install Salvaged Timber
From How to Fix a Wobbly Outdoor Stair Railing · Step 4 of 5 · Video by DO IT YOURSELF ITS EASY

Showing 12:26–12:44 of the source video. Watch the full video with every moment.
What happens in this clip
Once the paper template is made, transfer it to a piece of treated wood. Treated wood, or cedar, is recommended for exterior applications to resist further rot. Use an oscillating tool to precisely cut the new timber piece according to the template. This custom-cut piece is then fitted into the severely rotted section and secured in place with screws. This provides structural integrity to areas where the rot was too extensive for filler alone.
What's used
Tools
- Cordless Drill
- Oscillating Tool Duotech
- Hand saw
- Screws
- Treated Wood / Cedar
About the full video
This video details the process of repairing and restoring rotten exterior wood, specifically focusing on a garage door frame and a dormer. The project involves removing all compromised wood, cleaning the area, applying an exterior-grade adhesive/sealant to fill voids, shaping the material to match existing textures, and installing new pre-treated timber sections where extensive rot necessitates replacement. The goal is to achieve a durable, weatherproof repair that blends seamlessly with the original structure, making it look like new without the cost and effort of full board replacement.
Step 4 of 5: Repair or Replace Damaged Components
For minor cracks or rot, clean out the damaged area and fill with exterior-grade wood filler or epoxy, following the product instructions. For larger sections of rot or broken pieces, remove the damaged component entirely. Measure and cut new wood to match the original dimensions and specifications. Secure new components with appropriate fasteners and exterior-grade wood glue.
Every video in How to Fix a Wobbly Outdoor Stair Railing
Step 1: Inspect the Stair Railing
- 0:00–1:04 Identify Wobbly Railing Issues
- 0:21–0:29 Check Individual Baluster Security
- 0:20–0:28 Check Baluster Security
Step 2: Tighten Loose Fasteners
- 1:07–1:49 Re-secure Loose Deck Screws
- 0:34–0:35 Inspect and Tighten Hardware
- 0:08–0:13 Re-secure Loose Fasteners
Step 3: Reinforce Loose Posts
- 3:14–3:49 Install New Lag Bolts in Flat Posts
- 5:04–5:17 Install Lag Bolts in Corner Posts
- 2:41–2:51 Countersink and Secure Baluster Post
Step 4: Repair or Replace Damaged Components
- 0:10–0:16 Insert New Wood and Apply Epoxy Filler
- 12:26–12:44 Cut and Install Salvaged Timber (this video)
- 0:08–0:13 Install New Wood Reinforcement
Step 5: Test Stability and Finish
- 15:21–16:35 Final Inspection and Finishing Touches
- 0:26–0:33 Final Inspection and Readiness Check
- 8:57–9:08 Prime and Paint Railing
How to Fix a Wobbly Outdoor Stair Railing
This project outlines the steps to diagnose and fix a wobbly outdoor stair railing, ensuring its stability and safety. The process involves identifying the loose connections, reinforcing or replacing components, and testing the railing's sturdiness.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

