Install New Wood Reinforcement
From How to Fix a Wobbly Outdoor Stair Railing · Step 4 of 5 · Video by Royce Renovations

Showing 0:08–0:13 of the source video. Watch the full video with every moment.
What happens in this clip
Once the rotten section is completely removed and the cavity is clean, measure its precise dimensions. A new piece of solid wood, ideally treated lumber or a naturally rot-resistant species, is then cut to fit snugly into this cavity. The new wood piece is then inserted and tapped into place using a hammer, ensuring a tight fit that restores the structural integrity of the post and prepares it for the epoxy filler.
Goal: Restore structural integrity by installing a new wood section into the prepared cavity.
What's used
Tools
- Hammer
- Measuring Tape
- New Wood Piece
- Cedar
- Redwood
- Saw
- miter saw
- circular saw
- or hand saw).
About the full video
This project provides a step-by-step guide on how to repair localized rot at the base of a wooden fence post. The process involves precisely removing the damaged wood, fitting and securing a new wood section, applying a specialized epoxy wood filler for strength and durability, and finally sanding and painting the repaired area for a seamless and long-lasting finish.
Step 4 of 5: Repair or Replace Damaged Components
For minor cracks or rot, clean out the damaged area and fill with exterior-grade wood filler or epoxy, following the product instructions. For larger sections of rot or broken pieces, remove the damaged component entirely. Measure and cut new wood to match the original dimensions and specifications. Secure new components with appropriate fasteners and exterior-grade wood glue.
Every video in How to Fix a Wobbly Outdoor Stair Railing
Step 1: Inspect the Stair Railing
- 0:00–1:04 Identify Wobbly Railing Issues
- 0:21–0:29 Check Individual Baluster Security
- 0:20–0:28 Check Baluster Security
Step 2: Tighten Loose Fasteners
- 1:07–1:49 Re-secure Loose Deck Screws
- 0:34–0:35 Inspect and Tighten Hardware
- 0:08–0:13 Re-secure Loose Fasteners
Step 3: Reinforce Loose Posts
- 3:14–3:49 Install New Lag Bolts in Flat Posts
- 5:04–5:17 Install Lag Bolts in Corner Posts
- 2:41–2:51 Countersink and Secure Baluster Post
Step 4: Repair or Replace Damaged Components
- 0:10–0:16 Insert New Wood and Apply Epoxy Filler
- 12:26–12:44 Cut and Install Salvaged Timber
- 0:08–0:13 Install New Wood Reinforcement (this video)
Step 5: Test Stability and Finish
- 15:21–16:35 Final Inspection and Finishing Touches
- 0:26–0:33 Final Inspection and Readiness Check
- 8:57–9:08 Prime and Paint Railing
How to Fix a Wobbly Outdoor Stair Railing
This project outlines the steps to diagnose and fix a wobbly outdoor stair railing, ensuring its stability and safety. The process involves identifying the loose connections, reinforcing or replacing components, and testing the railing's sturdiness.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

