Install Lag Bolts in Corner Posts
From How to Fix a Wobbly Outdoor Stair Railing · Step 3 of 5 · Video by The Honest Carpenter

Showing 5:04–5:17 of the source video. Watch the full video with every moment.
What happens in this clip
After creating the washer pocket in the corner post, insert a 6-inch lag bolt (a longer bolt is typically needed for corner posts to ensure it reaches sufficient lumber depth) with its washer. Position the washer securely within the newly drilled flat pocket. Tap the lag bolt with a hammer if necessary to initiate the threads. Then, use the half-inch ratchet wrench with the appropriate socket to drive the lag bolt into the post until it is tight and secure. This final step reinforces the corner post, significantly reducing wobble and enhancing the overall safety of the deck railing.
Goal: Install a longer lag bolt into the prepared corner post, ensuring the washer is seated correctly in its new pocket, and tighten for increased stability.
What's used
Tools
- Exterior Lag Screws
- Hammer
- Ratchet Wrench
- Socket
- Washers
About the full video
This project details how to reinforce wobbly wooden deck railings by installing new, larger lag bolts and tightening existing fasteners. It addresses common construction shortcuts that lead to unstable railings and provides a practical solution for enhancing safety and stability, including specific instructions for flat and corner posts.
Step 3 of 5: Reinforce Loose Posts
For posts that remain wobbly after tightening fasteners, additional reinforcement is needed. Drill pilot holes from the outside of the post into the adjacent stair stringer or deck framing member. Then, drive long lag screws or carriage bolts through the post and securely into the framing. Use washers under the bolt head and nut to distribute pressure.
Every video in How to Fix a Wobbly Outdoor Stair Railing
Step 1: Inspect the Stair Railing
- 0:00–1:04 Identify Wobbly Railing Issues
- 0:21–0:29 Check Individual Baluster Security
- 0:20–0:28 Check Baluster Security
Step 2: Tighten Loose Fasteners
- 1:07–1:49 Re-secure Loose Deck Screws
- 0:34–0:35 Inspect and Tighten Hardware
- 0:08–0:13 Re-secure Loose Fasteners
Step 3: Reinforce Loose Posts
- 3:14–3:49 Install New Lag Bolts in Flat Posts
- 5:04–5:17 Install Lag Bolts in Corner Posts (this video)
- 2:41–2:51 Countersink and Secure Baluster Post
Step 4: Repair or Replace Damaged Components
- 0:10–0:16 Insert New Wood and Apply Epoxy Filler
- 12:26–12:44 Cut and Install Salvaged Timber
- 0:08–0:13 Install New Wood Reinforcement
Step 5: Test Stability and Finish
- 15:21–16:35 Final Inspection and Finishing Touches
- 0:26–0:33 Final Inspection and Readiness Check
- 8:57–9:08 Prime and Paint Railing
How to Fix a Wobbly Outdoor Stair Railing
This project outlines the steps to diagnose and fix a wobbly outdoor stair railing, ensuring its stability and safety. The process involves identifying the loose connections, reinforcing or replacing components, and testing the railing's sturdiness.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

