Prepare Anti-Slip Tread

What happens in this clip

Before applying the anti-slip stair tread, you need to prepare it for proper alignment. On the backing side of the anti-slip tread, either measure halfway across its width and place a mark using your pencil, or simply fold the tread in half temporarily to create a slight crease in the backing paper. This mark or crease will serve as the center guide for aligning the tread with the marked centerline on your stairs.

Goal: Mark the center of the anti-slip stair tread.

What's used

Tools

• Anti-slip stair tread Slips Away
• Pencil

About the full video

This video provides step-by-step instructions on how to easily install anti-slip stair treads on hardwood stairs, covering essential preparation, precise measurement for alignment, and proper application techniques to ensure a secure and bubble-free finish.

Step 4 of 5: Install Anti-Slip Treads (Alternative)

If using pre-formed anti-slip stair treads (rather than strips), align each tread carefully with the front edge of a stair. Most treads have an adhesive backing; remove this protective layer and press the tread firmly onto the stair. Ensure the tread lies flat and covers the desired surface area for maximum safety. Some treads may require screws for extra security, especially in high-traffic areas.

Open this step in the guide

Every video in How to Make Hardwood Stairs Safe for an Older Dog

1. Step 1: Clean Stair Treads

   • 0:34–0:40 Clean the Stairs
   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:04–0:07 Clean the Staircase

2. Step 2: Measure and Cut Traction Strips

   • 0:02 Measure and Cut Anti-Slip Strip
   • 0:20–0:25 Measure and Cut Anti-Slip Tape
   • 0:05–0:12 Measure and Cut Grip Tape Strips

3. Step 3: Apply Anti-Slip Traction Strips

   • 0:02–0:06 Apply Anti-Slip Strip
   • 1:14–1:23 Apply Non-Skid Strips to Steps
   • 1:07–1:32 Initial Tread Application

4. Step 4: Install Anti-Slip Treads (Alternative)

   • 1:07–1:32 Initial Tread Application
   • 0:54–1:07 Prepare Anti-Slip Tread (this video)
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

5. Step 5: Secure Edges and Corners

   • 0:28–0:49 Inserting and Securing Anti-Slip Strips
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products
   • 0:02–0:06 Apply Anti-Slip Strip