Apply Non-Skid Strips to Steps

What happens in this clip

Once the steps are perfectly clean and dry, it's time to apply the non-skid strips. Carefully peel off the backing from each adhesive strip. Position each strip on the step so that it is centered within the walking path and placed near the front edge of the step. This placement ensures maximum effectiveness where foot traffic typically occurs. Press down firmly along the entire length of the strip to ensure the adhesive makes full contact with the wooden surface, eliminating air bubbles and securing it in place.

Goal: Secure non-skid strips to each wooden step for improved traction

What's used

Tools

• Adhesive-backed Non-Skid Strips
• Pencil
• Tape Measure

About the full video

This project provides a simple and effective DIY solution to prevent slips and falls on outdoor wooden steps, especially during wet conditions. It involves cleaning the steps thoroughly and then applying adhesive-backed non-skid strips to provide enhanced traction.

Step 3 of 5: Apply Anti-Slip Traction Strips

Peel off the backing from one anti-slip traction strip at a time. Carefully align the strip with the edge of a stair tread, starting from the front edge and working towards the back. Press down firmly from the center outwards to ensure a secure bond and to eliminate any air bubbles. Repeat for all stair treads, ensuring consistent placement.

Open this step in the guide

Every video in How to Make Hardwood Stairs Safe for an Older Dog

1. Step 1: Clean Stair Treads

   • 0:34–0:40 Clean the Stairs
   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:04–0:07 Clean the Staircase

2. Step 2: Measure and Cut Traction Strips

   • 0:02 Measure and Cut Anti-Slip Strip
   • 0:20–0:25 Measure and Cut Anti-Slip Tape
   • 0:05–0:12 Measure and Cut Grip Tape Strips

3. Step 3: Apply Anti-Slip Traction Strips

   • 0:02–0:06 Apply Anti-Slip Strip
   • 1:14–1:23 Apply Non-Skid Strips to Steps (this video)
   • 1:07–1:32 Initial Tread Application

4. Step 4: Install Anti-Slip Treads (Alternative)

   • 1:07–1:32 Initial Tread Application
   • 0:54–1:07 Prepare Anti-Slip Tread
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

5. Step 5: Secure Edges and Corners

   • 0:28–0:49 Inserting and Securing Anti-Slip Strips
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products
   • 0:02–0:06 Apply Anti-Slip Strip