Measure and Cut Anti-Slip Tape

What happens in this clip

After the steps are clean and dry, the next step is to accurately measure and cut the anti-slip tape. The tape is unrolled and laid along the edge of the stair step where it will be applied to determine the precise length. Once the desired length is marked, scissors are used to cut a straight piece of tape from the roll. This ensures that the tape fits perfectly across the width of each step.

Goal: Obtain the correct length of anti-slip tape for each stair tread.

What's used

Tools

• Scissors

Materials

• Anti-Slip Tape (Slip No More brand)

About the full video

This project provides a detailed guide on how to enhance the safety of slippery tiled steps by installing 'Slip No More' anti-slip tape. The process covers essential preparation steps, including cleaning the surface, accurate measurement and cutting of the tape, precise application, and final securing with a roller to ensure superior grip and durability.

Step 2 of 5: Measure and Cut Traction Strips

Measure the width and depth of each individual stair tread. Using these measurements, mark the dimensions onto the anti-slip traction material. Employ a sharp utility knife or heavy-duty scissors to carefully cut out each strip, ensuring straight edges for a clean installation. Account for any slight variations in stair tread dimensions.

Open this step in the guide

Every video in How to Make Hardwood Stairs Safe for an Older Dog

1. Step 1: Clean Stair Treads

   • 0:34–0:40 Clean the Stairs
   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:04–0:07 Clean the Staircase

2. Step 2: Measure and Cut Traction Strips

   • 0:02 Measure and Cut Anti-Slip Strip
   • 0:20–0:25 Measure and Cut Anti-Slip Tape (this video)
   • 0:05–0:12 Measure and Cut Grip Tape Strips

3. Step 3: Apply Anti-Slip Traction Strips

   • 0:02–0:06 Apply Anti-Slip Strip
   • 1:14–1:23 Apply Non-Skid Strips to Steps
   • 1:07–1:32 Initial Tread Application

4. Step 4: Install Anti-Slip Treads (Alternative)

   • 1:07–1:32 Initial Tread Application
   • 0:54–1:07 Prepare Anti-Slip Tread
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

5. Step 5: Secure Edges and Corners

   • 0:28–0:49 Inserting and Securing Anti-Slip Strips
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products
   • 0:02–0:06 Apply Anti-Slip Strip