Measure and Cut Anti-Slip Strip

What happens in this clip

Unroll the anti-slip staircase guard strip and measure the length required for the edge of the first stair. Using scissors, carefully cut the strip to the determined length. Repeat this measurement and cutting process for all stairs that will receive a guard.

Goal: Obtain correctly sized anti-slip strips for each stair

What's used

Tools

• Measuring tape
• Yardstick
• Scissors
• Box cutter

Materials

• Anti-slip staircase guard strip
• Stair tread covers

About the full video

This project demonstrates the simple process of installing anti-slip "staircase guards" to prevent slips and falls on stairs. It involves preparing the stair surface, applying self-adhesive strips to the edge of each step, and trimming them to fit, significantly enhancing stair safety.

Step 2 of 5: Measure and Cut Traction Strips

Measure the width and depth of each individual stair tread. Using these measurements, mark the dimensions onto the anti-slip traction material. Employ a sharp utility knife or heavy-duty scissors to carefully cut out each strip, ensuring straight edges for a clean installation. Account for any slight variations in stair tread dimensions.

Open this step in the guide

Every video in How to Make Hardwood Stairs Safe for an Older Dog

1. Step 1: Clean Stair Treads

   • 0:34–0:40 Clean the Stairs
   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:04–0:07 Clean the Staircase

2. Step 2: Measure and Cut Traction Strips

   • 0:02 Measure and Cut Anti-Slip Strip (this video)
   • 0:20–0:25 Measure and Cut Anti-Slip Tape
   • 0:05–0:12 Measure and Cut Grip Tape Strips

3. Step 3: Apply Anti-Slip Traction Strips

   • 0:02–0:06 Apply Anti-Slip Strip
   • 1:14–1:23 Apply Non-Skid Strips to Steps
   • 1:07–1:32 Initial Tread Application

4. Step 4: Install Anti-Slip Treads (Alternative)

   • 1:07–1:32 Initial Tread Application
   • 0:54–1:07 Prepare Anti-Slip Tread
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

5. Step 5: Secure Edges and Corners

   • 0:28–0:49 Inserting and Securing Anti-Slip Strips
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products
   • 0:02–0:06 Apply Anti-Slip Strip