Apply Adhesive-Backed Anti-Slip Products

What happens in this clip

Once the surface is prepared and the material is sized, carefully apply the adhesive-backed anti-slip products. For items like the 'Casa Pura Bullnose' rubber treads or 'SlipDoctors Tape', which feature adhesive backing, simply peel off the protective layer and firmly press the material onto the clean, dry surface. Apply even pressure across the entire surface to ensure full contact and eliminate any trapped air bubbles, enhancing the bond's strength. Note that products with rounded corners, such as 'Slip Guard Safety' strips, are designed to help reduce peeling over time.

Goal: Securely attach adhesive-backed anti-slip materials to the prepared surface.

About the full video

This guide compiles information from a product review video to offer generalized steps for selecting and installing various outdoor anti-slip stair treads and tapes that predominantly utilize adhesive bonding or are made of rubberized materials. While the video primarily showcases different commercial products, these instructions extrapolate best practices for surface preparation, customization, and application of such materials for enhanced safety on stairs and walkways, adhering to the context of rubber walkway installation with adhesive bond.

Step 5 of 5: Secure Edges and Corners

Go over all installed traction strips or treads, paying close attention to the edges and corners. Use firm pressure with your hands, a roller, or the edge of a tool to press down any areas that may be lifting. This step is critical for preventing the material from peeling up over time and creating a tripping hazard. If any corners consistently lift, a small amount of appropriate adhesive might be considered, following manufacturer guidelines.

Open this step in the guide

Every video in How to Make Hardwood Stairs Safe for an Older Dog

1. Step 1: Clean Stair Treads

   • 0:34–0:40 Clean the Stairs
   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:04–0:07 Clean the Staircase

2. Step 2: Measure and Cut Traction Strips

   • 0:02 Measure and Cut Anti-Slip Strip
   • 0:20–0:25 Measure and Cut Anti-Slip Tape
   • 0:05–0:12 Measure and Cut Grip Tape Strips

3. Step 3: Apply Anti-Slip Traction Strips

   • 0:02–0:06 Apply Anti-Slip Strip
   • 1:14–1:23 Apply Non-Skid Strips to Steps
   • 1:07–1:32 Initial Tread Application

4. Step 4: Install Anti-Slip Treads (Alternative)

   • 1:07–1:32 Initial Tread Application
   • 0:54–1:07 Prepare Anti-Slip Tread
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

5. Step 5: Secure Edges and Corners

   • 0:28–0:49 Inserting and Securing Anti-Slip Strips
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products (this video)
   • 0:02–0:06 Apply Anti-Slip Strip