Prepare and Clean Stair Treads
From How to Install Carpet Treads on Winder Steps · Step 1 of 4 · Video by Oak Valley Designs

Showing 0:09–0:45 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by thoroughly cleaning the stair treads. You can use a microfiber cloth or any suitable cloth, optionally combined with a handheld vacuum, to remove all dust and loose dirt. The goal is to ensure the entire stair surface is clean and completely dry. This is crucial for the adhesive on the back of the carpet treads to stick properly. Avoid using any cleaning products that might leave a greasy residue, such as Pledge or Pine-Sol, as this can compromise the adhesive bond.
Goal: Clean the entire surface of each stair tread to remove all dust and loose dirt, ensuring it is nice and dry for optimal adhesive bonding.
What's used
Tools
- Handheld vacuum
- Microfiber cloth
About the full video
This project provides step-by-step instructions for easily installing carpet treads onto stairs using strong adhesive tape. It covers preparing the stairs by cleaning them, marking alignment with painter's tape, and then securely attaching the self-adhesive carpet treads for a secure and streamlined look.
What's said in this clip
Hi everyone, it's Amy with Oak Valley Designs. I'm going to talk to you about cleaning your stairs in preparation for your new carpet stair treads. So, you can grab a microfiber cloth or any cloth really works. You can do a handheld vacuum or you can use both. And what I like to do is simply take the cloth, make sure you're wiping the entire stair tread, get all of the dust, all of the loose dirt off of here. And the idea is to keep it nice and dry so that the adhesive on the back of your stair tread will really stick nicely. Try to avoid using anything that'll make it greasy, like pledge or pine saw. And that's all
Automatically transcribed from the source video.
Step 1 of 4: Inspect and Prepare Existing Treads
Before installing carpet treads, carefully inspect each existing stair tread for any signs of damage such as cracks, rot, or loose pieces. Also, check for any unevenness or bumps that could affect the fit and adhesion of the new treads. Clean the surface of each tread thoroughly, removing all dust, dirt, debris, and any old adhesive residue. A clean, smooth surface is crucial for the carpet treads to adhere properly and last.
Every video in How to Install Carpet Treads on Winder Steps
Step 1: Inspect and Prepare Existing Treads
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads (this video)
- 0:00–0:01 Prepare and Measure Stairs
Step 2: Measure and Mark for Winder Tread Cuts
- 4:47–7:15 Measure Winder Steps Depth
- 7:20–9:07 Measure and Cut Carpet
- 7:25–8:46 Measure Winder Steps Width
Step 3: Cut Carpet Treads for Winder Stairs
- 8:08–9:23 Cut Carpet Pieces
- 0:12–0:57 Measure and Cut Carpet Tread
- 2:15–3:58 Cut and Secure Second Angled Tread
Step 4: Attach Carpet Treads to Winder Stairs
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:04–0:06 Install Carpet Treads
- 10:14–11:57 Install Carpet on First Winder Step
How to Install Carpet Treads on Winder Steps
A high-level outline for installing carpet treads on winder steps, focusing on preparation, measurement, cutting, and attachment.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

