powered by

Measure and Cut Carpet Tread

From How to Install Carpet Treads on Winder Steps · Step 3 of 4 · Video by Direct Carpet

Showing 0:12–0:57 of the source video. Watch the full video with every moment.

What happens in this clip

Using a tape measure, accurately measure the width of the stair tread where the carpet will sit. The installer measures 12.5 inches. He then decides to add a half-inch to the measurement, cutting the carpet to 13 inches, to ensure a very snug fit, noting that a previous piece was 'a little tight.' Unroll the carpet and use scissors to carefully cut a straight line across the carpet, following the measured width.

Goal: Prepare a carpet piece of appropriate size for the stair tread.

What's used

Tools

  • Scissors
  • Tape Measure

Materials

  • Carpet Roll

About the full video

This DIY project details the step-by-step process of installing carpet treads on a wooden staircase, covering everything from securing padding and precise carpet cutting to stapling and finishing the edges for a clean, professional look.

Step 3 of 4: Cut Carpet Treads for Winder Stairs

Using the markings made in the previous step, carefully cut the carpet tread material. For straight edges, a sharp utility knife or a heavy-duty scissor is typically used. For the angled cuts on winder treads, a sharp utility knife is essential. Make multiple passes with the knife rather than trying to cut through in one go, especially for thicker carpet or backing. Ensure the cuts are clean and follow the marked lines precisely to achieve a perfect fit. If a template was created, use it as a guide for cutting the actual tread material.

Open this step in the guide

Every video in How to Install Carpet Treads on Winder Steps

  1. Step 1: Inspect and Prepare Existing Treads

  2. Step 2: Measure and Mark for Winder Tread Cuts

  3. Step 3: Cut Carpet Treads for Winder Stairs

  4. Step 4: Attach Carpet Treads to Winder Stairs

How to Install Carpet Treads on Winder Steps

A high-level outline for installing carpet treads on winder steps, focusing on preparation, measurement, cutting, and attachment.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Measure and Cut Carpet Tread — How to Install Carpet Treads on Winder Steps | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.