powered by

Install Carpet Treads with Adhesive

From How to Install Carpet Treads on Winder Steps · Step 4 of 4 · Video by Oak Valley Designs

Showing 1:16–2:09 of the source video. Watch the full video with every moment.

What happens in this clip

Take a carpet tread from its box. The easiest and most rewarding part is installation. First, peel off the protective backing from the adhesive strip on the back of the tread. Position the carpet tread by hooking its bullnose (the front edge) underneath the bottom edge of the stair tread. Then, gently pull back on the tread with one hand to ensure it's nice and tight against the bullnose. Once taut, press firmly across the entire surface of the tread, ensuring it adheres securely. Use the painter's tape as a guide to maintain perfect alignment, ensuring everything is straight.

Goal: Peel off the protective backing from the carpet tread, hook it under the bullnose of the stair, and then firmly press and align it using the painter's tape guide.

What's used

Tools

  • Carpet treads

About the full video

This project provides step-by-step instructions for easily installing carpet treads onto stairs using strong adhesive tape. It covers preparing the stairs by cleaning them, marking alignment with painter's tape, and then securely attaching the self-adhesive carpet treads for a secure and streamlined look.

What's said in this clip

Okay, the easiest part and the most rewarding part after all your measuring and hard work. These are your treads. They come in a box. Okay, all you do is peel off the back. Throw that in the floor. I've already put a few on, so I'm going to do the top step. Now, you see our painters tape is still here to guide us on the edge. So, everything is in alignment. You come to the next step and the first thing you do is hook the bullnose underneath the bottom edge and then pull back with this hand to make sure that it's nice and tight. So, as you press on the front and you pull on the back, put a little pressure across the tread, make sure it's lined up with the painters tape, and that's it. It's that easy.

Automatically transcribed from the source video.

Step 4 of 4: Attach Carpet Treads to Winder Stairs

Once the carpet treads are cut and the existing treads are clean, it's time for attachment. Most carpet treads come with an adhesive backing or are designed to be attached with a strong, double-sided carpet tape or adhesive. Peel off the protective backing from the adhesive. Carefully align the carpet tread with the existing stair tread, starting from the back or the tightest angle of the winder. Press down firmly, working from the center outwards, to ensure complete contact and a secure bond. Pay special attention to the edges and corners of the winder treads to eliminate any lifting or gaps. For enhanced security, some carpet treads can be further secured with small staples or brads, though this is less common with pre-made treads and may damage the underlying tread.

Open this step in the guide

Every video in How to Install Carpet Treads on Winder Steps

  1. Step 1: Inspect and Prepare Existing Treads

  2. Step 2: Measure and Mark for Winder Tread Cuts

  3. Step 3: Cut Carpet Treads for Winder Stairs

  4. Step 4: Attach Carpet Treads to Winder Stairs

How to Install Carpet Treads on Winder Steps

A high-level outline for installing carpet treads on winder steps, focusing on preparation, measurement, cutting, and attachment.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Install Carpet Treads with Adhesive — How to Install Carpet Treads on Winder Steps | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.