Cut and Secure Second Angled Tread
From How to Install Carpet Treads on Winder Steps · Step 3 of 4 · Video by Floors by Southern boys

Showing 2:15–3:58 of the source video. Watch the full video with every moment.
What happens in this clip
Following the technique from the previous step, the installer makes a second straight cut on the carpet for the next angled tread. This cut extends from the wall towards the previous cut on the adjacent step, effectively isolating this section of carpet. The carpet is then laid flat on the second tread, smoothed into place, and secured under the bullnose with the power stapler. Any remaining excess carpet is trimmed using the utility knife for a tidy finish.
What's used
Tools
- Electric Power Stapler
- Utility Knife
About the full video
This video details the process of installing loop pile carpet on winder stairs, emphasizing precise cutting and stretching techniques. It addresses the unique challenges of angled steps, demonstrating how to prepare the carpet, make strategic cuts to avoid triangular gaps, and use a knee kicker to ensure a tight, professional finish without damaging the loops, ultimately securing the carpet with a power stapler and tucking tool.
Step 3 of 4: Cut Carpet Treads for Winder Stairs
Using the markings made in the previous step, carefully cut the carpet tread material. For straight edges, a sharp utility knife or a heavy-duty scissor is typically used. For the angled cuts on winder treads, a sharp utility knife is essential. Make multiple passes with the knife rather than trying to cut through in one go, especially for thicker carpet or backing. Ensure the cuts are clean and follow the marked lines precisely to achieve a perfect fit. If a template was created, use it as a guide for cutting the actual tread material.
Every video in How to Install Carpet Treads on Winder Steps
Step 1: Inspect and Prepare Existing Treads
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:00–0:01 Prepare and Measure Stairs
Step 2: Measure and Mark for Winder Tread Cuts
- 4:47–7:15 Measure Winder Steps Depth
- 7:20–9:07 Measure and Cut Carpet
- 7:25–8:46 Measure Winder Steps Width
Step 3: Cut Carpet Treads for Winder Stairs
- 8:08–9:23 Cut Carpet Pieces
- 0:12–0:57 Measure and Cut Carpet Tread
- 2:15–3:58 Cut and Secure Second Angled Tread (this video)
Step 4: Attach Carpet Treads to Winder Stairs
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:04–0:06 Install Carpet Treads
- 10:14–11:57 Install Carpet on First Winder Step
How to Install Carpet Treads on Winder Steps
A high-level outline for installing carpet treads on winder steps, focusing on preparation, measurement, cutting, and attachment.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

