Cut Carpet Pieces
From How to Install Carpet Treads on Winder Steps · Step 3 of 4 · Video by Direct Carpet

Showing 8:08–9:23 of the source video. Watch the full video with every moment.
What happens in this clip
Using a sharp utility knife and a T-square or long straight edge, carefully cut the carpet pieces along the marked lines. Ensure your cuts are precise and clean. For the connecting edges between steps, a perfectly straight cut is essential for seamless joins. For other edges, maintain the extra inch of material you marked earlier. The presenter demonstrates cutting the carpet pieces, emphasizing the importance of accuracy for a professional finish.
What's used
Tools
- Carpet Material (Cut)
- T-Square Johnson Level & Tool
- Straight edge
- Utility Knife
About the full video
This project provides verbose, step-by-step instructions on how to accurately create paper templates for winder stairs, transfer those templates to carpet material, cut the carpet pieces, and then securely install the carpet runner using tack strips and staples. It emphasizes precision in measuring and cutting for a neat and safe finish on complex stair designs.
Step 3 of 4: Cut Carpet Treads for Winder Stairs
Using the markings made in the previous step, carefully cut the carpet tread material. For straight edges, a sharp utility knife or a heavy-duty scissor is typically used. For the angled cuts on winder treads, a sharp utility knife is essential. Make multiple passes with the knife rather than trying to cut through in one go, especially for thicker carpet or backing. Ensure the cuts are clean and follow the marked lines precisely to achieve a perfect fit. If a template was created, use it as a guide for cutting the actual tread material.
Every video in How to Install Carpet Treads on Winder Steps
Step 1: Inspect and Prepare Existing Treads
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:00–0:01 Prepare and Measure Stairs
Step 2: Measure and Mark for Winder Tread Cuts
- 4:47–7:15 Measure Winder Steps Depth
- 7:20–9:07 Measure and Cut Carpet
- 7:25–8:46 Measure Winder Steps Width
Step 3: Cut Carpet Treads for Winder Stairs
- 8:08–9:23 Cut Carpet Pieces (this video)
- 0:12–0:57 Measure and Cut Carpet Tread
- 2:15–3:58 Cut and Secure Second Angled Tread
Step 4: Attach Carpet Treads to Winder Stairs
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:04–0:06 Install Carpet Treads
- 10:14–11:57 Install Carpet on First Winder Step
How to Install Carpet Treads on Winder Steps
A high-level outline for installing carpet treads on winder steps, focusing on preparation, measurement, cutting, and attachment.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

