Insert AAA Batteries into Lights
From How to Install Battery-Powered Motion Stair Lights Without Wiring · Step 4 of 5 · Video by Austin Alley Adventures

Showing 1:40–1:47 of the source video. Watch the full video with every moment.
What happens in this clip
For each motion-activated light, open the battery compartment. Insert four AAA batteries, ensuring correct polarity as indicated inside the compartment. Close the battery compartment securely.
Goal: Load the required AAA batteries into each motion-activated LED light unit.
What's used
Materials
- AAA Batteries
- Motion-Activated Lights
About the full video
This video provides a step-by-step guide on how to install motion-activated LED lights on MorRyde StepAbove RV steps. The installation involves securely mounting aluminum brackets to the steps, attaching magnetic strips with 3M adhesive to these brackets, inserting batteries into the lights, and then magnetically attaching the lights to the strips. The project aims to enhance safety and convenience when using RV steps in the dark, and is presented as a quick and affordable upgrade.
What's said in this clip
taking the aluminum bracket and a couple of screws Center the bracket on the step I'm just going to eyeball it as long as you're close you'll be fine now we're going to take both lights and install four AAA batteries in each light take the two magnetic strips and peel the paper off the adhesive strips attach them to the brackets this double-sided tape is going
Automatically transcribed from the source video.
Step 4 of 5: Install Batteries
Open the battery compartment of each light fixture. Ensure you are using the type and quantity of batteries recommended by the manufacturer. Check the polarity (+/-) and insert them correctly. Close the battery compartment securely.
Every video in How to Install Battery-Powered Motion Stair Lights Without Wiring
Step 1: Determine Light Placement
- 5:35–6:58 Plan Light Placement and Spacing
- 0:34–0:49 Mark Light Placement
Step 2: Clean Mounting Surfaces
- 0:04–0:06 Prepare the Surface
- 0:05–0:06 Surface Preparation
- 0:05–0:09 Clean the Surface
Step 3: Mount Light Fixtures
- 2:05–2:16 Mount Motion-Activated Lights
- 0:55–1:01 Physical Installation
- 5:12–5:39 Install Second Lighting Fixtures and Test
Step 4: Install Batteries
- 1:21–1:39 Insert Batteries and Set Sensor
- 1:40–1:47 Insert AAA Batteries into Lights (this video)
- 1:18–2:08 Install Batteries
Step 5: Test Functionality
- 0:10–0:11 Test Functionality and Observe Results
- 0:02–0:14 Test Motion Sensor Functionality
- 1:35–1:50 Test Light Functionality
How to Install Battery-Powered Motion Stair Lights Without Wiring
Install battery-powered motion-sensing lights on stairs to improve visibility and safety without the need for electrical wiring. This involves mounting the light fixtures and ensuring the motion sensors are properly positioned to detect movement.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

