Surface Preparation
From How to Install Battery-Powered Motion Stair Lights Without Wiring · Step 2 of 5 · Video by Zerora Interio

Showing 0:05–0:06 of the source video. Watch the full video with every moment.
What happens in this clip
Before applying the LED strips, thoroughly clean the surface where they will be attached. Use rubbing alcohol and a clean cloth to wipe away any dust, dirt, or grease. A clean surface ensures proper adhesion of the LED strip's adhesive backing. Allow the surface to dry completely before proceeding.
Goal: Ensure a clean surface for LED strip adhesion
What's used
Tools
- Clean Cloth
- Rubbing Alcohol
About the full video
This project involves installing LED strip lights along a staircase to enhance aesthetics and provide ambient illumination. The process includes planning the layout, preparing the surface, installing the LED strips, connecting them to a power source, and finally testing the complete setup.
Step 2 of 5: Clean Mounting Surfaces
Using a clean cloth or sponge dampened with water and a mild detergent, wipe down the areas where the lights will be mounted. For tougher grime or residues, a bit of rubbing alcohol can be effective. Allow the surface to dry completely before proceeding.
Every video in How to Install Battery-Powered Motion Stair Lights Without Wiring
Step 1: Determine Light Placement
- 5:35–6:58 Plan Light Placement and Spacing
- 0:34–0:49 Mark Light Placement
Step 2: Clean Mounting Surfaces
- 0:04–0:06 Prepare the Surface
- 0:05–0:06 Surface Preparation (this video)
- 0:05–0:09 Clean the Surface
Step 3: Mount Light Fixtures
- 2:05–2:16 Mount Motion-Activated Lights
- 0:55–1:01 Physical Installation
- 5:12–5:39 Install Second Lighting Fixtures and Test
Step 4: Install Batteries
- 1:21–1:39 Insert Batteries and Set Sensor
- 1:40–1:47 Insert AAA Batteries into Lights
- 1:18–2:08 Install Batteries
Step 5: Test Functionality
- 0:10–0:11 Test Functionality and Observe Results
- 0:02–0:14 Test Motion Sensor Functionality
- 1:35–1:50 Test Light Functionality
How to Install Battery-Powered Motion Stair Lights Without Wiring
Install battery-powered motion-sensing lights on stairs to improve visibility and safety without the need for electrical wiring. This involves mounting the light fixtures and ensuring the motion sensors are properly positioned to detect movement.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

