Physical Installation
From How to Install Battery-Powered Motion Stair Lights Without Wiring · Step 3 of 5 · Video by The Review

Showing 0:55–1:01 of the source video. Watch the full video with every moment.
What happens in this clip
Proceed with the physical installation of the LED light bars. This process generally involves drilling holes into the underside of the stair treads (or other suitable locations depending on stair design and the 'lip' requirement) to mount the light bars. All necessary mounting hardware is typically included with the product. Although the installation is described as straightforward and easy, it is important to take your time to ensure precise placement and secure attachment of each light bar for the best aesthetic and functional outcome.
Goal: Mount the LED light bars onto the stairs.
What's used
Tools
- Drill Bits
- Drill
- Hand Drill
- Mounting Hardware
Materials
- LED Light Bars
About the full video
This project involves installing LED motion sensor light bars on staircases to provide automated, customizable illumination. The lights feature various settings, including dimming, color tone adjustment, and speed control, all managed via a remote. Installation requires drilling holes, but the process is described as easy, with all mounting hardware included. A key consideration is ensuring the stairs have a 'lip' for optimal light direction and avoiding glare. Users are also advised that pets can trigger the motion sensors.
Step 3 of 5: Mount Light Fixtures
Most battery-powered motion-sensing stair lights come with adhesive backing or small screws. If using adhesive, peel off the protective film and firmly press the light onto the marked position for the recommended time (usually 30 seconds). If using screws, pre-drill small pilot holes and then secure the fixture with the provided screws.
Every video in How to Install Battery-Powered Motion Stair Lights Without Wiring
Step 1: Determine Light Placement
- 5:35–6:58 Plan Light Placement and Spacing
- 0:34–0:49 Mark Light Placement
Step 2: Clean Mounting Surfaces
- 0:04–0:06 Prepare the Surface
- 0:05–0:06 Surface Preparation
- 0:05–0:09 Clean the Surface
Step 3: Mount Light Fixtures
- 2:05–2:16 Mount Motion-Activated Lights
- 0:55–1:01 Physical Installation (this video)
- 5:12–5:39 Install Second Lighting Fixtures and Test
Step 4: Install Batteries
- 1:21–1:39 Insert Batteries and Set Sensor
- 1:40–1:47 Insert AAA Batteries into Lights
- 1:18–2:08 Install Batteries
Step 5: Test Functionality
- 0:10–0:11 Test Functionality and Observe Results
- 0:02–0:14 Test Motion Sensor Functionality
- 1:35–1:50 Test Light Functionality
How to Install Battery-Powered Motion Stair Lights Without Wiring
Install battery-powered motion-sensing lights on stairs to improve visibility and safety without the need for electrical wiring. This involves mounting the light fixtures and ensuring the motion sensors are properly positioned to detect movement.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

