Mark Light Placement
From How to Install Battery-Powered Motion Stair Lights Without Wiring · Step 1 of 5 · Video by DecksDirect

Showing 0:34–0:49 of the source video. Watch the full video with every moment.
What happens in this clip
Using a tape measure and a pencil, mark the precise placement for each step light on the stair riser or step board. It is crucial to avoid positioning the lights directly into stair joists to prevent structural damage and simplify installation. As a general guideline, builders typically space these lights three to four feet apart for optimal illumination and aesthetic appeal.
Goal: Determine and mark precise locations for each stair light
What's used
Tools
- Pencil
- Tape Measure Stanley
About the full video
This project provides a step-by-step guide for installing hardwired stair and step lighting on a deck. It covers planning, drilling, wiring connections, and final light placement to enhance safety and aesthetics.
Step 1 of 5: Determine Light Placement
Walk the stairs and visualize where each light will be mounted. Consider the height on the riser or wall that will best capture motion as someone approaches the step. Ensure the placement will not obstruct foot traffic or appear visually intrusive. Mark the chosen positions lightly with a pencil.
Every video in How to Install Battery-Powered Motion Stair Lights Without Wiring
Step 1: Determine Light Placement
- 5:35–6:58 Plan Light Placement and Spacing
- 0:34–0:49 Mark Light Placement (this video)
Step 2: Clean Mounting Surfaces
- 0:04–0:06 Prepare the Surface
- 0:05–0:06 Surface Preparation
- 0:05–0:09 Clean the Surface
Step 3: Mount Light Fixtures
- 2:05–2:16 Mount Motion-Activated Lights
- 0:55–1:01 Physical Installation
- 5:12–5:39 Install Second Lighting Fixtures and Test
Step 4: Install Batteries
- 1:21–1:39 Insert Batteries and Set Sensor
- 1:40–1:47 Insert AAA Batteries into Lights
- 1:18–2:08 Install Batteries
Step 5: Test Functionality
- 0:10–0:11 Test Functionality and Observe Results
- 0:02–0:14 Test Motion Sensor Functionality
- 1:35–1:50 Test Light Functionality
How to Install Battery-Powered Motion Stair Lights Without Wiring
Install battery-powered motion-sensing lights on stairs to improve visibility and safety without the need for electrical wiring. This involves mounting the light fixtures and ensuring the motion sensors are properly positioned to detect movement.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

