Install Batteries
From How to Install Battery-Powered Motion Stair Lights Without Wiring · Step 4 of 5 · Video by ZRK REVIEWS

Showing 1:18–2:08 of the source video. Watch the full video with every moment.
What happens in this clip
To access the battery compartments, grasp each end of the light fixture and twist them counter-clockwise to separate the main body into three sections. Insert two C-cell batteries into each of the outer compartments, ensuring the negative side of the battery aligns with the negative terminal as indicated. Once all four batteries are in place, reassemble the light fixture by twisting the compartments back together clockwise until they are firmly locked. The light will automatically turn on briefly once the batteries are correctly inserted and the unit is sealed, but it will only operate in darkness.
Goal: Insert batteries to power the motion sensor light.
What's used
Tools
- Mr. Beams MB970 LED Slim Safety Light Mr. Beams
Materials
- C-cell alkaline batteries Duracell
About the full video
This video guides the user through unboxing, setting up, and installing a Mr. Beams MB970 LED Slim Safety Light, a battery-powered, motion-sensing LED light suitable for various indoor and outdoor locations for enhanced security and energy savings.
Step 4 of 5: Install Batteries
Open the battery compartment of each light fixture. Ensure you are using the type and quantity of batteries recommended by the manufacturer. Check the polarity (+/-) and insert them correctly. Close the battery compartment securely.
Every video in How to Install Battery-Powered Motion Stair Lights Without Wiring
Step 1: Determine Light Placement
- 5:35–6:58 Plan Light Placement and Spacing
- 0:34–0:49 Mark Light Placement
Step 2: Clean Mounting Surfaces
- 0:04–0:06 Prepare the Surface
- 0:05–0:06 Surface Preparation
- 0:05–0:09 Clean the Surface
Step 3: Mount Light Fixtures
- 2:05–2:16 Mount Motion-Activated Lights
- 0:55–1:01 Physical Installation
- 5:12–5:39 Install Second Lighting Fixtures and Test
Step 4: Install Batteries
- 1:21–1:39 Insert Batteries and Set Sensor
- 1:40–1:47 Insert AAA Batteries into Lights
- 1:18–2:08 Install Batteries (this video)
Step 5: Test Functionality
- 0:10–0:11 Test Functionality and Observe Results
- 0:02–0:14 Test Motion Sensor Functionality
- 1:35–1:50 Test Light Functionality
How to Install Battery-Powered Motion Stair Lights Without Wiring
Install battery-powered motion-sensing lights on stairs to improve visibility and safety without the need for electrical wiring. This involves mounting the light fixtures and ensuring the motion sensors are properly positioned to detect movement.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

