powered by

Plan Light Placement and Spacing

From How to Install Battery-Powered Motion Stair Lights Without Wiring · Step 1 of 5 · Video by Premier Outdoor Living

Showing 5:35–6:58 of the source video. Watch the full video with every moment.

What happens in this clip

Before installing the lights, carefully plan their placement on the stair risers. For wrap-around steps, it's recommended to stagger the lights rather than placing them in a straight line to achieve a more aesthetically pleasing cascading effect. Identify the midpoint of each riser, and then measure out equal distances (e.g., 3 feet) from the center in both directions to mark the light positions. Use masking tape or a marker to indicate the precise locations where each light will be installed.

Goal: Determine the optimal and aesthetically pleasing layout for step lights.

What's used

Tools

  • Marker/Pencil
  • Masking Tape
  • Tape Measure

About the full video

This project details the installation of low-voltage strip lighting onto deck steps to enhance safety and aesthetics. It covers planning the layout for optimal visual appeal, installing the individual lights into pre-drilled holes in the stair risers, connecting them using a plug-and-play wiring system with splitters, and managing the wiring for a clean finish. The video emphasizes a staggered light pattern for wrap-around steps.

What's said in this clip

hey what are you doing there sean oh um i'm actually getting ready to uh prep for all of these decorators riser lights that we're gonna be putting in so this is a little bit complicated because we have these wrap around stairs whenever we have these you can see each tread is a little bit longer than the one before it we don't want to just do straight lines we want to stagger them and it just looks a little bit nicer so what i like to do start on my middle riser i find my middle point that's right there and then we do an offset off of that so right now i'm doing the three foot spacing between lights so i pulled three feet off in both directions so on this riser right in between these two lights and then from this one to this one we have that three foot spacing and then it's going to be the same on this bottom riser what do you think [Music] that's good so you can see because we staggered them we have this our top and bottom riser are lining up but because this one is about two feet longer we get an extra light here so it looks like it cascades down this corner but all the spacing is still the same if you have them just in straight lines it gets really wacky looking in this corner because you could either go light light light but then you have this big open space and it just looks a little a little weird so we like to do it like this on wrap around stairs and uh a lot of lights

Automatically transcribed from the source video.

Step 1 of 5: Determine Light Placement

Walk the stairs and visualize where each light will be mounted. Consider the height on the riser or wall that will best capture motion as someone approaches the step. Ensure the placement will not obstruct foot traffic or appear visually intrusive. Mark the chosen positions lightly with a pencil.

Open this step in the guide

Every video in How to Install Battery-Powered Motion Stair Lights Without Wiring

  1. Step 1: Determine Light Placement

  2. Step 2: Clean Mounting Surfaces

  3. Step 3: Mount Light Fixtures

  4. Step 4: Install Batteries

  5. Step 5: Test Functionality

How to Install Battery-Powered Motion Stair Lights Without Wiring

Install battery-powered motion-sensing lights on stairs to improve visibility and safety without the need for electrical wiring. This involves mounting the light fixtures and ensuring the motion sensors are properly positioned to detect movement.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Plan Light Placement and Spacing — How to Install Battery-Powered Motion Stair Lights Without Wiring | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.