Fix Squeaks from Above (Hardwood/Laminate with Nails)
From Squeaky Stair Repair · Step 3 of 7 · Video by Lowe's Home Improvement
Showing 0:49–1:04 of the source video. Watch the full video with every moment.
What happens in this clip
If you cannot access the floor joists from below, you can fix squeaks from above. First, locate the nearest floor joist directly underneath the squeaky area using a stud finder. Mark the location of the joist on the floor. Once the joist is located, attach the flooring directly to the joist using a finish nail. Drive the finish nail into the floor and subfloor, securing them to the joist. To hide the nail head, use a nail set and a hammer to countersink the nail slightly below the surface of the floor. This method is generally suitable for hardwood or laminate floors where the nail can be concealed.
Goal: Secure flooring to joist from above
What's used
Tools
- Finish Nail
- Hammer
- Nail Set
- Stud Finder Zircon
- Tapping method (less accurate)
About the full video
This project provides instructions on how to effectively fix squeaky floors by addressing the movement between floor components. It covers solutions for situations where you have access to the floor joists from below, as well as methods for repairing squeaks from above the finished floor, whether it's hardwood, laminate, or carpeted.
Step 3 of 7: Tighten Fasteners
Locate any screws or nails in the vicinity of the squeak. Use a screwdriver to tighten loose screws. If nails are present, carefully pry them out using a nail set and hammer, then drive in wood screws. Ensure screws are countersunk slightly below the wood surface.
Every video in Squeaky Stair Repair
Step 1: Identify Squeak Source
- 0:00–0:38 Diagnose the Squeaky Stair Problem
- 0:00–0:09 Locate the Squeak
- 2:21–3:48 Diagnose Creaking Causes
Step 2: Inspect for Loose Tread or Riser
- 0:00–0:30 Locate Squeak and Assess Access
- 2:21–3:48 Diagnose Creaking Causes
- 0:00–0:38 Diagnose the Squeaky Stair Problem
Step 3: Tighten Fasteners
- 6:48–10:07 Address Additional Squeaky Spots
- 0:49–1:04 Fix Squeaks from Above (Hardwood/Laminate with Nails) (this video)
- 2:09–2:47 Drive Trim Head Screw
Step 4: Shim Gaps
- 0:54–1:14 Trim Excess Shim for a Flush Finish
- 0:11–0:13 Shim the Low Spots
- 1:47–2:12 Insert Wood Shims into Hole
Step 5: Apply Lubricant or Powder
- 0:52–2:39 Apply Powder
- 0:34–0:54 Apply Dry Lubricant to Eliminate Squeaks
- 2:51–3:25 Eliminate Creaking Floors with Talcum Powder
Step 6: Secure from Underside (if accessible)
- 0:49–1:06 Reinforce from Underside with Screws
- 1:48–2:20 Secure Risers to Treads from Behind
- 4:46–5:44 Attach Support Blocks and Secure Wedges
Step 7: Test the Repair
- 9:40–9:57 Final Check and Confirmation
- 3:30–3:44 Test for Squeaks and Fill Holes
- 0:27–0:32 Final Inspection and Testing
Questions about Squeaky Stair Repair
What are the most common reasons stairs squeak, and how does this project address them?
Stairs typically squeak due to loose treads or risers rubbing against the stair frame, or when fasteners become loose, creating friction and movement. This project directly tackles these issues by tightening connections, shimming gaps to eliminate movement, and applying lubricants to reduce friction at contact points.
What specialized tools or materials will I need beyond standard DIY equipment for this project?
While basic screwdrivers and pliers are essential, you'll also need a nail set to recess nails, a framing hammer for precise adjustments, and a utility knife for trimming shims. Specific materials include wood shims, scrap wood blocks for support, angle brackets for reinforcement, and #10 3-inch wood screws.
How difficult is this project for a beginner, and what's the estimated time commitment?
This project is considered beginner-friendly as it primarily involves diagnosis and simple mechanical fixes. The estimated 4-hour timeframe is generally achievable, but locating the precise source of the squeak can sometimes be the most time-consuming part of the process.
What should I do if I can't access the underside of my stairs to secure components?
If the underside is inaccessible, focus on top-side solutions. You can drive screws through the top of treads into risers or stringers, or use shims and adhesive between loose components from above. Specialized anti-squeak kits, which often involve small screws or plugs inserted from the top, are also available.
Are there any common mistakes to avoid, or safety tips to keep in mind while repairing squeaky stairs?
A common mistake is failing to accurately pinpoint the squeak's source before attempting a fix, which can lead to ineffective repairs. For safety, ensure the staircase is well-lit and clear of obstructions, mark any steps temporarily out of use, and keep tools securely placed to prevent tripping hazards.
Can I use any type of lubricant or powder, or are there specific recommendations for eliminating stair squeaks?
For lubrication, talcum powder or powdered graphite are highly effective for reducing friction between wood components without creating a greasy mess. Avoid using oily lubricants, as these can attract dust and grime, potentially worsening the squeak over time or staining the wood.
Squeaky Stair Repair
This project addresses the common issue of squeaky stairs by identifying the source of the noise and applying targeted fixes to eliminate it. The process involves a systematic approach to diagnose the cause, which can range from loose treads or risers to friction between wood components, and then implementing appropriate solutions such as tightening fasteners, shimming gaps, or applying lubricants.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.