Connect Strip Sections

What happens in this clip

To join two strip light sections together in a straight line, use a connector clip. Push the open end of each strip into the connector clip, ensuring the copper pads align, then close the clip to lock it in place. To make your strip lights go around a corner, use one corner connector and two connector clips. Attach the end of each strip light section into each side of the corner connector using the clips. If you need to make your strip lights go over uneven surfaces, you can use a flexible strip connector. Connect a flexible strip connector to the strip lights and over the uneven area using two connector clips, one at each end, and then connect the other end of the flexible connector to the next section of lighting.

Goal: Join multiple strip light sections to navigate corners or uneven surfaces

What's used

Tools

• Connector Clips Lepro
• straight or with other connectors.
• Corner Connector Lepro
• Flexible Strip Connector Lepro
• LED Strip Lights Lepro

About the full video

This project provides a comprehensive guide on how to install, cut, and connect LED strip lights to create beautiful mood lighting in any room or area. It covers surface preparation, adhering the lights, optional security clips, connecting power, cutting the strips, and using various connectors for turns and uneven surfaces.

Step 3 of 7: Connect LED Strips

Connect the cut segments of LED strips using appropriate connectors. If your strips are designed for continuous runs, you'll need to solder or use specific clip-on connectors to join them. Ensure all connections are secure and insulated to prevent short circuits. This step will create a single, continuous run of LEDs or separate runs for each stair as planned.

Open this step in the guide

Other videos for this step

• Connect LED Strips (Plug-and-Play or Soldering)
• Connect LED Light Strips to Controller