Connect LED Light Strips to Controller

What happens in this clip

Connect the individual LED light strips to the output terminals of the controller. The controller typically has multiple output channels, each corresponding to a stair step. Connect one LED strip to each designated output. Ensure that the polarity of each LED strip matches the output of the controller (positive to positive, negative to negative). These connections usually involve small wires and screw terminals, requiring a screwdriver for secure attachment.

Goal: Connect the lighting elements to the control system

What's used

Tools

• LED Light Strips (in profiles)
• LED Staircase Inductive Control Device V2-STEP-1002
• Screwdriver
• Wiring (black)

About the full video

This project demonstrates the installation and configuration of a smart LED lighting system for staircases. It involves connecting a power supply, a central controller, motion sensors, and LED light strips. The system is then configured to control the sequential lighting speed and the number of steps illuminated, creating an automated and visually appealing lighting solution for stairs.

Step 3 of 7: Connect LED Strips

Connect the cut segments of LED strips using appropriate connectors. If your strips are designed for continuous runs, you'll need to solder or use specific clip-on connectors to join them. Ensure all connections are secure and insulated to prevent short circuits. This step will create a single, continuous run of LEDs or separate runs for each stair as planned.

Open this step in the guide

Other videos for this step

• Connect LED Strips (Plug-and-Play or Soldering)
• Connect Strip Sections