Test and Adjust Settings
From Staircase Lighting · Step 6 of 7 · Video by AboutElectricity
Showing 3:34–4:49 of the source video.
What happens in this clip
After all wiring connections are made, the system is ready for testing. For safety, the interconnected components should ideally be placed within a suitable electrical enclosure, such as a PVC junction box (as shown in the video for a brief moment). Once safely enclosed and connected to a power source, turn on the power supply. The motion detector typically has two control dials: one for 'TIME' (adjusting the duration the light stays on after motion is detected) and one for 'LUX' (adjusting the light sensitivity, determining when the sensor activates based on ambient light levels). To test the motion detector's functionality during daylight, turn the 'LUX' sensitivity dial all the way to the right (maximum sensitivity). This should allow the sensor to detect motion even in bright conditions. The video demonstrates the light turning on and off by simulating motion detection (by moving a hand near the sensor). Adjust the 'TIME' dial to set the desired light-on duration.
What's used
Tools
- PVC Enclosure
- Screwdriver or small tool
About the full video
This video demonstrates how to wire an LED light fixture to a motion detector to enable automatic illumination based on movement, aiming for enhanced security and energy savings. The process involves disassembling the motion sensor, identifying its terminals, preparing electrical cables, and connecting the live, neutral, and earth wires to both the motion sensor and the LED light fixture using appropriate connectors. The video highlights important electrical safety considerations, such as the classification of the motion sensor and the proper handling of conductors.
Step 6 of 7: Test the System
Before permanently concealing wiring, turn on the power to the system and test its functionality. Walk past the motion sensors to ensure the LED lights illuminate. Check that they turn off after the designated delay period. Troubleshoot any issues with connections or sensor sensitivity.
Other videos for this step
Staircase Lighting
This project involves installing motion-activated LED strip lights on a staircase to provide automatic illumination and enhance safety and ambiance. The process includes planning the layout, selecting appropriate materials, wiring the lights and sensors, and mounting the components.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.