powered by
Clip 1/3
Helpful?

Step 6 · Apply Adhesive and Fasteners

Apply a generous bead of high-quality construction adhesive to the back of each new tread. Spread the adhesive evenly, ensuring good coverage, especially along the edges and towards the nosing. For waterfall treads, ensure adhesive is applied to the entire surface that will contact the existing tread. Immediately after applying adhesive, position the tread onto the existing stair. For added security, pre-drill pilot holes through the new tread into the existing tread below, and then drive screws or finish nails. Ensure fasteners are countersunk slightly below the surface for a clean finish. For waterfall edges, consider using specialized brackets or reinforcing blocks if required by the design or for structural integrity.

Tools and Materials

Caulk Gun Porter-Cable 16-Gauge Pneumatic Finish Nailer DEWALT 16 oz. Steel Rip Claw Nailing Hammer DEWALT #6 9/64 in. High Speed Steel Countersink Drill Bit Measuring Tape Liquid Nails 10 oz. Heavy Duty Construction Adhesive Wood Screws DEWALT 1-3/4 in. x 18-Gauge Brad Nails (2500 per Pack)
Apply Adhesive and Fasteners · How to Cover Waterfall-Style Stairs with Treads · Oak Valley Designs DIY Hub

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.