How to Add Grip to Stair Nosings

Using a stiff brush and a degreasing cleaner, scrub the entire surface of each stair nosing. For stubborn residues, a mild abrasive pad may be necessary. Rinse the stairs with clean water and allow them to dry completely before proceeding. A final wipe down with rubbing alcohol can ensure a pristine surface.

Measure the length and width of each stair nosing. Using sharp scissors or a utility knife, cut the anti-slip tape to the measured dimensions, ensuring a snug fit without overlapping the edges of the nosing. For curved nosings, consider cutting the tape into smaller segments for a smoother application or using a flexible anti-slip tape.

Peel back a small section of the backing paper from one end of the cut anti-slip tape. Align the tape with the edge of the stair nosing and carefully press it down, gradually peeling off the backing paper as you go. Use a roller or a firm flat object to press the tape down, ensuring there are no air bubbles or wrinkles. Work from the center outwards to push out any trapped air.

Refer to the anti-slip tape manufacturer's instructions for the recommended curing time. During this period, avoid walking on the treated stair nosings as much as possible to allow the adhesive to fully set and achieve maximum grip.