Measure and Cut Anti-Slip Strip

What happens in this clip

Unroll the anti-slip staircase guard strip and measure the length required for the edge of the first stair. Using scissors, carefully cut the strip to the determined length. Repeat this measurement and cutting process for all stairs that will receive a guard.

Goal: Obtain correctly sized anti-slip strips for each stair

What's used

Tools

• Measuring tape
• Yardstick
• Scissors
• Box cutter

Materials

• Anti-slip staircase guard strip
• Stair tread covers

About the full video

This project demonstrates the simple process of installing anti-slip "staircase guards" to prevent slips and falls on stairs. It involves preparing the stair surface, applying self-adhesive strips to the edge of each step, and trimming them to fit, significantly enhancing stair safety.

Step 2 of 4: Prepare Anti-Slip Tape

Measure the length and width of each stair nosing. Using sharp scissors or a utility knife, cut the anti-slip tape to the measured dimensions, ensuring a snug fit without overlapping the edges of the nosing. For curved nosings, consider cutting the tape into smaller segments for a smoother application or using a flexible anti-slip tape.

Open this step in the guide

Every video in How to Add Grip to Stair Nosings

1. Step 1: Clean Stair Nosing Surface

   • 0:04–0:07 Clean the Staircase
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:18–0:31 Clean the Stairs

2. Step 2: Prepare Anti-Slip Tape

   • 0:20–0:25 Measure and Cut Anti-Slip Tape
   • 0:02 Measure and Cut Anti-Slip Strip (this video)
   • 1:10–1:11 Size and Customize Anti-Slip Materials

3. Step 3: Apply Anti-Slip Tape

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:25–0:39 Position and Adhere Tape
   • 0:39–0:52 Activate Adhesive with Roller

4. Step 4: Allow Tape to Cure

   • 3:44–4:26 Final Curing and Caulking
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure