Clean and Smooth Stairs

What happens in this clip

Before starting the installation, ensure that the existing stairs are thoroughly cleaned and smoothed. Use a broom to remove any dust, debris, or loose particles from the risers and treads. A clean and smooth surface is essential for proper adhesion and a professional finish.

Goal: Prepare the existing stairs for installation

What's used

Tools

• Broom

About the full video

This project provides step-by-step instructions for properly installing performance accessory stair treads and risers. It covers preparation, precise measuring and cutting, adhesive application, securing with a finish nailer, caulking expansion gaps, and installing optional return trim for exposed stair sides. The guide emphasizes the importance of specific adhesive types and proper expansion gaps for a durable and aesthetically pleasing finish.

Step 1 of 4: Clean Stair Nosing Surface

Using a stiff brush and a degreasing cleaner, scrub the entire surface of each stair nosing. For stubborn residues, a mild abrasive pad may be necessary. Rinse the stairs with clean water and allow them to dry completely before proceeding. A final wipe down with rubbing alcohol can ensure a pristine surface.

Open this step in the guide

Every video in How to Add Grip to Stair Nosings

1. Step 1: Clean Stair Nosing Surface

   • 0:04–0:07 Clean the Staircase
   • 0:36–0:41 Clean and Smooth Stairs (this video)
   • 0:18–0:31 Clean the Stairs

2. Step 2: Prepare Anti-Slip Tape

   • 0:20–0:25 Measure and Cut Anti-Slip Tape
   • 0:02 Measure and Cut Anti-Slip Strip
   • 1:10–1:11 Size and Customize Anti-Slip Materials

3. Step 3: Apply Anti-Slip Tape

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:25–0:39 Position and Adhere Tape
   • 0:39–0:52 Activate Adhesive with Roller

4. Step 4: Allow Tape to Cure

   • 3:44–4:26 Final Curing and Caulking
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure