Measure and Cut Anti-Slip Tape
From How to Add Grip to Stair Nosings · Step 2 of 4 · Video by Slip No More

Showing 0:20–0:25 of the source video. Watch the full video with every moment.
What happens in this clip
After the steps are clean and dry, the next step is to accurately measure and cut the anti-slip tape. The tape is unrolled and laid along the edge of the stair step where it will be applied to determine the precise length. Once the desired length is marked, scissors are used to cut a straight piece of tape from the roll. This ensures that the tape fits perfectly across the width of each step.
Goal: Obtain the correct length of anti-slip tape for each stair tread.
What's used
Tools
- Scissors
Materials
- Anti-Slip Tape (Slip No More brand)
About the full video
This project provides a detailed guide on how to enhance the safety of slippery tiled steps by installing 'Slip No More' anti-slip tape. The process covers essential preparation steps, including cleaning the surface, accurate measurement and cutting of the tape, precise application, and final securing with a roller to ensure superior grip and durability.
Step 2 of 4: Prepare Anti-Slip Tape
Measure the length and width of each stair nosing. Using sharp scissors or a utility knife, cut the anti-slip tape to the measured dimensions, ensuring a snug fit without overlapping the edges of the nosing. For curved nosings, consider cutting the tape into smaller segments for a smoother application or using a flexible anti-slip tape.
Every video in How to Add Grip to Stair Nosings
Step 1: Clean Stair Nosing Surface
- 0:04–0:07 Clean the Staircase
- 0:36–0:41 Clean and Smooth Stairs
- 0:18–0:31 Clean the Stairs
Step 2: Prepare Anti-Slip Tape
- 0:20–0:25 Measure and Cut Anti-Slip Tape (this video)
- 0:02 Measure and Cut Anti-Slip Strip
- 1:10–1:11 Size and Customize Anti-Slip Materials
Step 3: Apply Anti-Slip Tape
- 0:02–0:06 Apply Anti-Slip Strip
- 0:25–0:39 Position and Adhere Tape
- 0:39–0:52 Activate Adhesive with Roller
Step 4: Allow Tape to Cure
- 3:44–4:26 Final Curing and Caulking
- 0:39–0:46 Allow Tuff Grip to Dry and Cure
How to Add Grip to Stair Nosings
This project outlines methods for adding enhanced grip to stair nosings to improve safety and prevent slips. Options include applying anti-slip tapes, coatings, or installing specialized stair tread covers.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

