Activate Adhesive with Roller

What happens in this clip

Once the anti-slip tape strip has been fully positioned and laid onto the stair step, a small paint roller is used to firmly press down along the entire length of the tape. This action is crucial as the pressure from the roller activates the adhesive, ensuring a strong and lasting bond between the tape and the stair surface. It's explicitly reminded that anti-slip tape should only be applied when the steps are completely dry, as moisture can significantly hinder adhesion.

Goal: Ensure maximum adhesion of the anti-slip tape to the stair surface.

What's used

Tools

• Paint roller (small)

Materials

• Anti-Slip Tape (Slip No More brand)

About the full video

This project provides a detailed guide on how to enhance the safety of slippery tiled steps by installing 'Slip No More' anti-slip tape. The process covers essential preparation steps, including cleaning the surface, accurate measurement and cutting of the tape, precise application, and final securing with a roller to ensure superior grip and durability.

Step 3 of 4: Apply Anti-Slip Tape

Peel back a small section of the backing paper from one end of the cut anti-slip tape. Align the tape with the edge of the stair nosing and carefully press it down, gradually peeling off the backing paper as you go. Use a roller or a firm flat object to press the tape down, ensuring there are no air bubbles or wrinkles. Work from the center outwards to push out any trapped air.

Open this step in the guide

Every video in How to Add Grip to Stair Nosings

1. Step 1: Clean Stair Nosing Surface

   • 0:04–0:07 Clean the Staircase
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:18–0:31 Clean the Stairs

2. Step 2: Prepare Anti-Slip Tape

   • 0:20–0:25 Measure and Cut Anti-Slip Tape
   • 0:02 Measure and Cut Anti-Slip Strip
   • 1:10–1:11 Size and Customize Anti-Slip Materials

3. Step 3: Apply Anti-Slip Tape

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:25–0:39 Position and Adhere Tape
   • 0:39–0:52 Activate Adhesive with Roller (this video)

4. Step 4: Allow Tape to Cure

   • 3:44–4:26 Final Curing and Caulking
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure