powered by

Info You Need: Staircases - Adventures in Homebuilding

Video by Your New House · 3 moments used in Oak Valley Designs's DIY guides · 2:58 long

Moments in this video

  1. 0:42–0:56 Measure and Verify Rise and Run From How to Check Your Stairs Against Building Code, Step 1: Measure Stair Rise

    According to the Uniform Building Code, the 'rise' (vertical height from the top of one step to the top of the next) should be 8 inches for residential homes. The 'run' (horizontal surface area or tread depth) should be 9 inches. The host uses a tape measure to illustrate these critical dimensions on an unfinished staircase.

  2. 0:42–0:56 Measure and Verify Rise and Run From How to Check Your Stairs Against Building Code, Step 2: Measure Stair Run

    According to the Uniform Building Code, the 'rise' (vertical height from the top of one step to the top of the next) should be 8 inches for residential homes. The 'run' (horizontal surface area or tread depth) should be 9 inches. The host uses a tape measure to illustrate these critical dimensions on an unfinished staircase.

  3. 1:50–2:05 Measure Handrail Height From How to Check Your Stairs Against Building Code, Step 7: Inspect Handrails

    Another critical safety dimension is the handrail height. Measuring from the bottom of the step to the top of the handrail, the height must be between 34 and 38 inches, as required by code. The host explains that a handrail outside this range can be either too difficult to grasp securely (if too tall) or allow someone to fall over the front (if too short).

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Info You Need: Staircases - Adventures in Homebuilding — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.