Tighten the Newel Post Fastener
From Newel Post and Banister Tightening · Step 3 of 8 · Video by Royce Renovations
Showing 0:12–0:15 of the source video.
What happens in this clip
A cordless drill, equipped with an appropriate drill bit (e.g., hex, square drive, or socket bit, depending on the fastener type), is used to tighten the internal bolt. The drill bit is inserted into the access hole at the top of the newel post, and the drill is activated to rotate the fastener. This action pulls the newel post down firmly onto its anchoring plate, thereby eliminating any wobble and securing it in place.
Goal: Tighten the newel post using the internal fastening system
What's used
Tools
- Appropriate Drill Bit
- hex key bit
- socket bit
- square drive bit).
- Cordless Drill
- Newel Post
About the full video
This project addresses a common issue in home renovations: a loose newel post on a staircase. The video demonstrates a quick and effective method to secure the newel post by identifying the internal anchoring mechanism and tightening it from the top using a cordless drill, ensuring the staircase railing is stable and safe.
Step 3 of 8: Tighten Base Screws (if applicable)
If the newel post is loose at its base and attached with screws, locate these screws. Use an appropriate screwdriver or drill to tighten them until the post feels secure. Be careful not to overtighten, which could strip the screw holes or damage the wood.
Other videos for this step
Newel Post and Banister Tightening
This project involves identifying the cause of a wobbly newel post and loose banister and then applying appropriate methods to secure them. This may include tightening screws, reinforcing connections, or using wood shims and adhesive.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.