Secure the Newel Post with Screws

What happens in this clip

Once the screw caps are removed and the fastening screws are exposed, your next step is to secure the newel post. First, attempt to tighten any visible existing screws using an appropriate screwdriver or a power drill with a bit. Often, a loose newel post simply requires tightening these existing fasteners. If the post remains wobbly or the existing screw holes appear stripped and no longer hold the screws firmly, you may need to add new screws for better stability. The narrator suggests backing out any ineffective screws. Then, drill new pilot holes at an angle (for example, if the original screw was vertical, drill the new one at a slight diagonal). He specifically advises drilling new screws at an 'opposite angle' to ensure they bite into fresh, undisturbed wood and create a stronger, more secure hold. Insert new, longer wood screws into these angled pilot holes and tighten them until the newel post is completely firm and stable.

Goal: Eliminate movement and make the newel post stable.

What's used

Tools

• Drill Bits (for pilot holes)
• Power Drill/Driver
• Screwdriver
• Wood Screws

About the full video

This DIY project provides a step-by-step guide to fixing a loose newel post at the base of a staircase. It involves identifying the hidden fastening points, typically covered by decorative caps, removing these caps to access existing screws for tightening, and if necessary, installing new screws at strategic angles to provide a firm and stable connection.

Step 3 of 8: Tighten Base Screws (if applicable)

If the newel post is loose at its base and attached with screws, locate these screws. Use an appropriate screwdriver or drill to tighten them until the post feels secure. Be careful not to overtighten, which could strip the screw holes or damage the wood.

Open this step in the guide

Other videos for this step

• Tighten the Newel Post Fastener