Thread Cables Through Hardware

What happens in this clip

Once all the railing hardware is securely mounted, begin threading the stainless steel cables through the openings. Start at one end of the railing section and meticulously feed each cable through all the intermediate hardware pieces and tensioning mechanisms until it reaches the other end. Ensure the cables are straight and not twisted. Depending on the system, one end of the cable might be permanently fixed while the other end goes through a tensioner.

Goal: Run the stainless steel cables through the installed railing hardware

What's used

Tools

• Cable Railing Hardware
• acting as guides and anchors.
• Stainless Steel Cables
• Synthetic rope (not typically
• forming the barrier.

About the full video

This project guides through the installation of a cable railing system on a wooden deck. It involves securing specialized hardware to wooden posts, meticulously threading stainless steel cables through these fittings, applying appropriate tension to each cable to ensure a secure and taut barrier, and finally trimming any excess cable for a professional and clean finish. The process enhances the deck's aesthetic with a modern, open feel while providing a safe perimeter.

Step 8 of 11: Thread Cables Through Posts

Carefully thread the free end of each cable through the designated holes or fittings on the next posts in line. For stair railings, ensure the cable follows the angle of the stairs smoothly. Avoid kinking or damaging the cable during this process. If the cable is stiff, a cable puller tool might be helpful.

Open this step in the guide

Other videos for this step

• Thread Cable Railing
• Thread Cables Through Railing Posts