Secure Treads to Stairs

What happens in this clip

To install the prepared carpet tread, first ensure your alignment is correct. You can use a laser level to project a straight line from the wall across the stair, or simply use a tape measure to ensure consistent spacing from the wall for each tread. Once aligned, carefully place the tread onto the stair, ensuring the adhesive side makes contact with the hardwood. Apply firm pressure across the entire surface of the tread, using your feet or a specialized roller tool, to ensure the double-sided tape adheres completely and securely to the stair.

Goal: Securely attach each carpet tread to the hardwood stair.

What's used

Tools

• Carpet Treads (with tape applied) Canyon
• Laser Level
• Chalk line
• Roller Tool
• Tape Measure

About the full video

This project provides a step-by-step guide on how to install carpet treads on hardwood stairs using double-sided carpet tape. The process involves preparing the treads, accurately positioning them, and securing them to enhance safety and aesthetics without requiring advanced tools or skills.

Step 5 of 6: Position and Press Carpet Treads

Peel off the backing from the adhesive (if applicable) and carefully position the carpet tread onto the stair, aligning it with your marks. Once positioned, press down firmly across the entire surface of the tread, starting from the center and working outwards. Apply extra pressure to the edges.

Open this step in the guide

Every video in How to Put Carpet Treads on Already-Carpeted Stairs

1. Step 1: Clean Existing Carpet Surface

   • 0:34–0:40 Clean the Stairs
   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:18–0:31 Clean the Stairs

2. Step 2: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:12–0:57 Measure and Cut Carpet Tread

3. Step 3: Prepare Carpet Treads (If Necessary)

   • 0:12–0:57 Measure and Cut Carpet Tread
   • 2:09–3:19 Measure and Cut Carpet Pieces
   • 0:37–0:59 Measure and Cut Carpet

4. Step 4: Apply Adhesive to Carpet Treads

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs
   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads

5. Step 5: Position and Press Carpet Treads

   • 0:13–0:21 Position and Secure Tread
   • 3:25–4:32 Secure Treads to Stairs (this video)
   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads

6. Step 6: Allow Adhesive to Cure

   • 3:44–4:26 Final Curing and Caulking
   • 3:06–3:19 Project Completion