Prepare and Clean Stair Treads
From How to Put Carpet Treads on Already-Carpeted Stairs · Step 1 of 6 · Video by Oak Valley Designs
Showing 0:09–0:45 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by thoroughly cleaning the stair treads. You can use a microfiber cloth or any suitable cloth, optionally combined with a handheld vacuum, to remove all dust and loose dirt. The goal is to ensure the entire stair surface is clean and completely dry. This is crucial for the adhesive on the back of the carpet treads to stick properly. Avoid using any cleaning products that might leave a greasy residue, such as Pledge or Pine-Sol, as this can compromise the adhesive bond.
Goal: Clean the entire surface of each stair tread to remove all dust and loose dirt, ensuring it is nice and dry for optimal adhesive bonding.
What's used
Tools
- Handheld vacuum
- Microfiber cloth
About the full video
This project provides step-by-step instructions for easily installing carpet treads onto stairs using strong adhesive tape. It covers preparing the stairs by cleaning them, marking alignment with painter's tape, and then securely attaching the self-adhesive carpet treads for a secure and streamlined look.
What's said in this clip
Hi everyone, it's Amy with Oak Valley Designs. I'm going to talk to you about cleaning your stairs in preparation for your new carpet stair treads. So, you can grab a microfiber cloth or any cloth really works. You can do a handheld vacuum or you can use both. And what I like to do is simply take the cloth, make sure you're wiping the entire stair tread, get all of the dust, all of the loose dirt off of here. And the idea is to keep it nice and dry so that the adhesive on the back of your stair tread will really stick nicely. Try to avoid using anything that'll make it greasy, like pledge or pine saw. And that's all
Automatically transcribed from the source video.
Step 1 of 6: Clean Existing Carpet Surface
Using a vacuum cleaner with a brush attachment, meticulously clean each stair tread. Pay special attention to the edges and corners where dirt tends to accumulate. Ensure the entire surface area where the tread will be placed is free of any obstructions or loose fibers.
Every video in How to Put Carpet Treads on Already-Carpeted Stairs
Step 1: Clean Existing Carpet Surface
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads (this video)
- 0:18–0:31 Clean the Stairs
Step 2: Measure and Mark Tread Placement
- 0:10–0:16 Measure and Mark Stair Tread Placement
- 0:00–0:11 Measure and Align First Stair Tread
- 0:12–0:57 Measure and Cut Carpet Tread
Step 3: Prepare Carpet Treads (If Necessary)
- 0:12–0:57 Measure and Cut Carpet Tread
- 2:09–3:19 Measure and Cut Carpet Pieces
- 0:37–0:59 Measure and Cut Carpet
Step 4: Apply Adhesive to Carpet Treads
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Position and Press Carpet Treads
- 0:13–0:21 Position and Secure Tread
- 3:25–4:32 Secure Treads to Stairs
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 6: Allow Adhesive to Cure
- 3:44–4:26 Final Curing and Caulking
- 3:06–3:19 Project Completion
How to Put Carpet Treads on Already-Carpeted Stairs
This project outlines the process of applying carpet treads to stairs that are already carpeted, enhancing safety and aesthetics. It involves preparing the existing carpet, cutting the treads to size, and securely attaching them. This covers the steps from initial measurement to final application.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.