Measure and Align First Stair Tread

What happens in this clip

Begin by taking a pre-cut carpet stair tread and placing it on the first visible step. Use a tape measure to check its width and ensure it is centered and aligned properly on the stair. The video shows measuring from the edge of the stair to the edge of the tread to confirm consistent placement. Make any necessary adjustments to ensure perfect alignment before permanently attaching.

Goal: Prepare and align the first carpet tread

What's used

Tools

• Carpet Stair Tread
• Hands
• Tape Measure Lufkin
• Ruler

About the full video

This project demonstrates the straightforward process of installing pre-cut carpet stair treads onto a wooden staircase. It focuses on careful measurement, alignment, and secure placement of each tread to enhance both the safety and aesthetic appeal of the stairs.

Step 2 of 6: Measure and Mark Tread Placement

For each stair, measure the width and depth of the carpeted surface. Using a tape measure, determine the exact placement for the carpet tread. You may want to lightly mark the intended position with chalk or a fabric marker, ensuring the marks will be covered by the tread.

Open this step in the guide

Every video in How to Put Carpet Treads on Already-Carpeted Stairs

1. Step 1: Clean Existing Carpet Surface

   • 0:34–0:40 Clean the Stairs
   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:18–0:31 Clean the Stairs

2. Step 2: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement
   • 0:00–0:11 Measure and Align First Stair Tread (this video)
   • 0:12–0:57 Measure and Cut Carpet Tread

3. Step 3: Prepare Carpet Treads (If Necessary)

   • 0:12–0:57 Measure and Cut Carpet Tread
   • 2:09–3:19 Measure and Cut Carpet Pieces
   • 0:37–0:59 Measure and Cut Carpet

4. Step 4: Apply Adhesive to Carpet Treads

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs
   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads

5. Step 5: Position and Press Carpet Treads

   • 0:13–0:21 Position and Secure Tread
   • 3:25–4:32 Secure Treads to Stairs
   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads

6. Step 6: Allow Adhesive to Cure

   • 3:44–4:26 Final Curing and Caulking
   • 3:06–3:19 Project Completion