Measure and Mark Stair Tread Placement

What happens in this clip

To ensure consistent and straight placement of the carpet treads, measure the desired distance from the edge of the stairs. Then, use blue painter's tape to create parallel guide lines up the entire staircase. This helps in visually aligning each tread.

Goal: Create guides for even tread application

What's used

Tools

• Tape Measure
• Yardstick

Materials

• Blue Painter's Tape

About the full video

This project involves installing peel-and-stick carpet stair treads on wooden stairs to improve safety, comfort, and aesthetics. The process includes unboxing the treads, measuring and marking the stairs for consistent placement, and then applying each tread.

Step 2 of 6: Measure and Mark Tread Placement

For each stair, measure the width and depth of the carpeted surface. Using a tape measure, determine the exact placement for the carpet tread. You may want to lightly mark the intended position with chalk or a fabric marker, ensuring the marks will be covered by the tread.

Open this step in the guide

Every video in How to Put Carpet Treads on Already-Carpeted Stairs

1. Step 1: Clean Existing Carpet Surface

   • 0:34–0:40 Clean the Stairs
   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:18–0:31 Clean the Stairs

2. Step 2: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement (this video)
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:12–0:57 Measure and Cut Carpet Tread

3. Step 3: Prepare Carpet Treads (If Necessary)

   • 0:12–0:57 Measure and Cut Carpet Tread
   • 2:09–3:19 Measure and Cut Carpet Pieces
   • 0:37–0:59 Measure and Cut Carpet

4. Step 4: Apply Adhesive to Carpet Treads

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs
   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads

5. Step 5: Position and Press Carpet Treads

   • 0:13–0:21 Position and Secure Tread
   • 3:25–4:32 Secure Treads to Stairs
   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads

6. Step 6: Allow Adhesive to Cure

   • 3:44–4:26 Final Curing and Caulking
   • 3:06–3:19 Project Completion