Clean the Stairs

What happens in this clip

Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.

Goal: Ensure stairs are clean and free of dirt, debris, stains, and marks.

What's used

Tools

• Damp rag
• Sponge
• Dust pan and brush
• Broom

About the full video

This video provides step-by-step instructions on how to easily install anti-slip stair treads on hardwood stairs, covering essential preparation, precise measurement for alignment, and proper application techniques to ensure a secure and bubble-free finish.

Step 1 of 6: Clean Existing Carpet Surface

Using a vacuum cleaner with a brush attachment, meticulously clean each stair tread. Pay special attention to the edges and corners where dirt tends to accumulate. Ensure the entire surface area where the tread will be placed is free of any obstructions or loose fibers.

Open this step in the guide

Every video in How to Put Carpet Treads on Already-Carpeted Stairs

1. Step 1: Clean Existing Carpet Surface

   • 0:34–0:40 Clean the Stairs
   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:18–0:31 Clean the Stairs (this video)

2. Step 2: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:12–0:57 Measure and Cut Carpet Tread

3. Step 3: Prepare Carpet Treads (If Necessary)

   • 0:12–0:57 Measure and Cut Carpet Tread
   • 2:09–3:19 Measure and Cut Carpet Pieces
   • 0:37–0:59 Measure and Cut Carpet

4. Step 4: Apply Adhesive to Carpet Treads

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs
   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads

5. Step 5: Position and Press Carpet Treads

   • 0:13–0:21 Position and Secure Tread
   • 3:25–4:32 Secure Treads to Stairs
   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads

6. Step 6: Allow Adhesive to Cure

   • 3:44–4:26 Final Curing and Caulking
   • 3:06–3:19 Project Completion