Prepare Picture Wire on Frame
From How to Hang Heavy Pictures on Drywall in a Stairwell · Step 6 of 8 · Video by Jon Peters - Longview Woodworking

Showing 0:47–1:09 of the source video. Watch the full video with every moment.
What happens in this clip
Securely attach the plastic-coated picture wire to the D-rings or picture hooks on the back of the picture frame. Thread the wire through the hook, wrap it up and over, and then down around itself multiple times to create a tight, secure knot that won't unravel or pull. Ensure the attachment points for the wire are set back about three-quarters of an inch from the inner edge of the frame. This setback is crucial as it 'sucks' the painting tight against the wall, preventing it from leaning forward and giving it a more modern, finished look.
Goal: Attach the picture wire to the frame, ensuring it's tied securely and positioned inward from the frame's edge to allow the picture to hang flush against the wall.
What's used
Tools
- D-rings or Picture Hooks
- Picture Wire (Plastic Coated)
About the full video
This video provides a comprehensive guide on how to hang pictures, particularly large ones, using picture wire and a single or dual wall hanger. It emphasizes proper wire attachment for a flush wall fit and a precise measuring technique to ensure accurate placement of wall hooks.
Step 6 of 8: Attach Hanging Hardware to Picture Frame
On the back of the picture frame, locate the positions for the D-rings. Typically, these are placed a few inches down from the top of the frame and towards the sides. Use the screws provided with the D-rings or appropriate wood screws to attach them securely to the frame. Once the D-rings are in place, thread the heavy-duty picture wire through them. Ensure the wire is taut but not overly tight, creating a slight arc. The length of the wire should be appropriate for the hanging hardware on the wall, allowing the picture to hang straight without excessive slack.
Every video in How to Hang Heavy Pictures on Drywall in a Stairwell
Step 1: Locate Wall Studs
- 1:46–1:55 Locate Wall Studs for Heavy Frames
- 0:15–0:34 Locate Wall Studs
- 0:29–0:38 Scan for Wall Studs
Step 2: Determine Picture Weight and Hardware Needs
- 0:43–1:06 Select Appropriate Hanging Hardware
- 3:08–3:29 Mount Heavy Frames with D-Ring Hangers
- 0:39–1:17 Securely Hang Wall Art
Step 3: Mark Hanging Points
- 2:46–3:32 Mark Wall for Picture Placement
- 10:44–11:53 Hang Pictures and Final Adjustments
- 1:23–3:53 Measure and Mark Picture Placement
Step 4: Install Hardware into Studs
- 1:36–1:52 Install Nail into Stud (Heavy/Permanent)
Step 5: Install Heavy-Duty Drywall Anchors
Step 6: Attach Hanging Hardware to Picture Frame
- 0:47–1:09 Prepare Picture Wire on Frame (this video)
- 5:34–8:32 Attach Hanging Wire to D-Rings
- 6:59–7:55 Attach Hanging Hardware and Wire
Step 7: Hang the Picture
- 3:57–4:39 Hang the Picture
- 3:57–4:39 Hang the Picture
- 3:56–4:39 Hang and Level the Picture
Step 8: Final Check and Leveling
- 6:12–6:23 Final Level Check and Cleanup
- 0:42–0:49 Hang and Level Picture
- 3:56–4:39 Hang and Level the Picture
How to Hang Heavy Pictures on Drywall in a Stairwell
This project outlines the steps for securely hanging heavy pictures on drywall in a stairwell, ensuring safety and stability. It involves selecting appropriate mounting hardware, locating studs or using heavy-duty anchors, and proper installation techniques.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

