Hang Pictures and Final Adjustments
From How to Hang Heavy Pictures on Drywall in a Stairwell · Step 3 of 8 · Video by Proper DIY

Showing 10:44–11:53 of the source video. Watch the full video with every moment.
What happens in this clip
Once all offset measurements are recorded, return to the wall. For each picture, measure down from its previously marked top-edge position by the calculated offset distance. This new mark indicates the precise location for the center of the screw or hanging point. Using a spirit level, ensure the marked horizontal line for each picture's top is perfectly level. Install the appropriate fixings (e.g., pan-head screws into plasterboard fixings or directly into studs) at these newly marked points. Erase any visible pencil marks from the wall. Finally, carefully hang each picture on its respective fixing. Use a spirit level one last time to make any minor adjustments, ensuring all pictures are perfectly level and aligned according to your initial layout.
Goal: Transfer the offset measurements to the wall, install the fixings, and hang the pictures, ensuring they are level and in their planned positions.
What's used
Tools
- Eraser
- Pencil
- Ruler / Measuring Tape
- Spirit Level Vaunt
About the full video
This project details methods for hanging framed art and canvases, with a special focus on damage-free techniques using 3M Command Strips and traditional fixings for different wall types. It also provides a clever trick for accurately leveling multiple pictures, even with varying hanging mechanisms.
Step 3 of 8: Mark Hanging Points
Determine the exact location where you want to hang the picture. Use a tape measure to mark the desired height from the floor or ceiling, and the desired horizontal center point. If you located studs, align the intended hanging points of your hardware with the center of the studs. If you are using anchors, mark the precise spots where the anchors will be installed, ensuring they are level and at the correct height for the picture. Double-check all measurements for accuracy before proceeding.
Every video in How to Hang Heavy Pictures on Drywall in a Stairwell
Step 1: Locate Wall Studs
- 1:46–1:55 Locate Wall Studs for Heavy Frames
- 0:15–0:34 Locate Wall Studs
- 0:29–0:38 Scan for Wall Studs
Step 2: Determine Picture Weight and Hardware Needs
- 0:43–1:06 Select Appropriate Hanging Hardware
- 3:08–3:29 Mount Heavy Frames with D-Ring Hangers
- 0:39–1:17 Securely Hang Wall Art
Step 3: Mark Hanging Points
- 2:46–3:32 Mark Wall for Picture Placement
- 10:44–11:53 Hang Pictures and Final Adjustments (this video)
- 1:23–3:53 Measure and Mark Picture Placement
Step 4: Install Hardware into Studs
- 1:36–1:52 Install Nail into Stud (Heavy/Permanent)
Step 5: Install Heavy-Duty Drywall Anchors
Step 6: Attach Hanging Hardware to Picture Frame
- 0:47–1:09 Prepare Picture Wire on Frame
- 5:34–8:32 Attach Hanging Wire to D-Rings
- 6:59–7:55 Attach Hanging Hardware and Wire
Step 7: Hang the Picture
- 3:57–4:39 Hang the Picture
- 3:57–4:39 Hang the Picture
- 3:56–4:39 Hang and Level the Picture
Step 8: Final Check and Leveling
- 6:12–6:23 Final Level Check and Cleanup
- 0:42–0:49 Hang and Level Picture
- 3:56–4:39 Hang and Level the Picture
How to Hang Heavy Pictures on Drywall in a Stairwell
This project outlines the steps for securely hanging heavy pictures on drywall in a stairwell, ensuring safety and stability. It involves selecting appropriate mounting hardware, locating studs or using heavy-duty anchors, and proper installation techniques.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

