Mark Wall for Picture Placement
From How to Hang Heavy Pictures on Drywall in a Stairwell · Step 3 of 8 · Video by Jon Peters - Longview Woodworking

Showing 2:46–3:32 of the source video. Watch the full video with every moment.
What happens in this clip
First, hold the picture up to the wall at the desired height and location. Use painter's tape to mark the top edge of where the picture will hang. Then, use the tape measure with a piece of painter's tape on the wall to mark the precise point where the picture hook(s) will be placed. Measure down from the top mark on the wall by the 'wire drop' distance (e.g., 7 and 3/4 inches). This indicates the vertical position of the hook(s). Find the horizontal center of the picture's desired location on the wall. From this center point, measure outward horizontally (e.g., 6 inches to the right and 6 inches to the left for a total of 12 inches between hooks) to mark the exact locations for two picture hooks. Use a pencil to mark on the painter's tape, rather than directly on the wall, to avoid damage.
Goal: Use the measured dimensions and painter's tape to precisely mark the wall for the top, center, and hook locations of the picture.
What's used
Tools
- Painter's Tape
- Pencil
- Tape Measure
About the full video
This video provides a comprehensive guide on how to hang pictures, particularly large ones, using picture wire and a single or dual wall hanger. It emphasizes proper wire attachment for a flush wall fit and a precise measuring technique to ensure accurate placement of wall hooks.
Step 3 of 8: Mark Hanging Points
Determine the exact location where you want to hang the picture. Use a tape measure to mark the desired height from the floor or ceiling, and the desired horizontal center point. If you located studs, align the intended hanging points of your hardware with the center of the studs. If you are using anchors, mark the precise spots where the anchors will be installed, ensuring they are level and at the correct height for the picture. Double-check all measurements for accuracy before proceeding.
Every video in How to Hang Heavy Pictures on Drywall in a Stairwell
Step 1: Locate Wall Studs
- 1:46–1:55 Locate Wall Studs for Heavy Frames
- 0:15–0:34 Locate Wall Studs
- 0:29–0:38 Scan for Wall Studs
Step 2: Determine Picture Weight and Hardware Needs
- 0:43–1:06 Select Appropriate Hanging Hardware
- 3:08–3:29 Mount Heavy Frames with D-Ring Hangers
- 0:39–1:17 Securely Hang Wall Art
Step 3: Mark Hanging Points
- 2:46–3:32 Mark Wall for Picture Placement (this video)
- 10:44–11:53 Hang Pictures and Final Adjustments
- 1:23–3:53 Measure and Mark Picture Placement
Step 4: Install Hardware into Studs
- 1:36–1:52 Install Nail into Stud (Heavy/Permanent)
Step 5: Install Heavy-Duty Drywall Anchors
Step 6: Attach Hanging Hardware to Picture Frame
- 0:47–1:09 Prepare Picture Wire on Frame
- 5:34–8:32 Attach Hanging Wire to D-Rings
- 6:59–7:55 Attach Hanging Hardware and Wire
Step 7: Hang the Picture
- 3:57–4:39 Hang the Picture
- 3:57–4:39 Hang the Picture
- 3:56–4:39 Hang and Level the Picture
Step 8: Final Check and Leveling
- 6:12–6:23 Final Level Check and Cleanup
- 0:42–0:49 Hang and Level Picture
- 3:56–4:39 Hang and Level the Picture
How to Hang Heavy Pictures on Drywall in a Stairwell
This project outlines the steps for securely hanging heavy pictures on drywall in a stairwell, ensuring safety and stability. It involves selecting appropriate mounting hardware, locating studs or using heavy-duty anchors, and proper installation techniques.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

