Hang and Level the Picture
From How to Hang Heavy Pictures on Drywall in a Stairwell · Step 8 of 8 · Video by Jon Peters - Longview Woodworking

Showing 3:56–4:39 of the source video. Watch the full video with every moment.
What happens in this clip
With the wall hooks securely in place, lift the picture and carefully place the taut picture wire over the hooks. Allow the picture to settle. Observe the picture to ensure it is level and sitting flush against the wall. If necessary, make slight adjustments by gently shifting the picture. If the picture isn't perfectly level, you may need to subtly adjust the tension of the picture wire on the back of the frame, but often the precise measuring technique minimizes this need. The felt pads applied earlier will help maintain the picture's position and prevent it from going crooked over time.
Goal: Carefully place the picture wire onto the installed wall hooks and make minor adjustments to ensure the picture is perfectly level and flush against the wall.
About the full video
This video provides a comprehensive guide on how to hang pictures, particularly large ones, using picture wire and a single or dual wall hanger. It emphasizes proper wire attachment for a flush wall fit and a precise measuring technique to ensure accurate placement of wall hooks.
Step 8 of 8: Final Check and Leveling
After hanging, step back and view the picture from a distance to ensure it is centered and positioned correctly. Use a level placed on the top edge of the frame to check if it is perfectly horizontal. Make small adjustments to the picture's position on the hanging hardware as needed until it is perfectly straight and level. Confirm that the hardware is holding the weight securely and there are no signs of strain.
Every video in How to Hang Heavy Pictures on Drywall in a Stairwell
Step 1: Locate Wall Studs
- 1:46–1:55 Locate Wall Studs for Heavy Frames
- 0:15–0:34 Locate Wall Studs
- 0:29–0:38 Scan for Wall Studs
Step 2: Determine Picture Weight and Hardware Needs
- 0:43–1:06 Select Appropriate Hanging Hardware
- 3:08–3:29 Mount Heavy Frames with D-Ring Hangers
- 0:39–1:17 Securely Hang Wall Art
Step 3: Mark Hanging Points
- 2:46–3:32 Mark Wall for Picture Placement
- 10:44–11:53 Hang Pictures and Final Adjustments
- 1:23–3:53 Measure and Mark Picture Placement
Step 4: Install Hardware into Studs
- 1:36–1:52 Install Nail into Stud (Heavy/Permanent)
Step 5: Install Heavy-Duty Drywall Anchors
Step 6: Attach Hanging Hardware to Picture Frame
- 0:47–1:09 Prepare Picture Wire on Frame
- 5:34–8:32 Attach Hanging Wire to D-Rings
- 6:59–7:55 Attach Hanging Hardware and Wire
Step 7: Hang the Picture
- 3:57–4:39 Hang the Picture
- 3:57–4:39 Hang the Picture
- 3:56–4:39 Hang and Level the Picture
Step 8: Final Check and Leveling
- 6:12–6:23 Final Level Check and Cleanup
- 0:42–0:49 Hang and Level Picture
- 3:56–4:39 Hang and Level the Picture (this video)
How to Hang Heavy Pictures on Drywall in a Stairwell
This project outlines the steps for securely hanging heavy pictures on drywall in a stairwell, ensuring safety and stability. It involves selecting appropriate mounting hardware, locating studs or using heavy-duty anchors, and proper installation techniques.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

