Position and Secure Stair Runner
From How to Protect Stairs from Dog Nail Scratches · Step 5 of 5 · Video by Floor Street

Showing 0:58–1:50 of the source video. Watch the full video with every moment.
What happens in this clip
Starting from the top step, unroll the stair runner, ensuring it is perfectly central on the step. You can use a previously cut spacer or a tape measure (Stanley) to verify equal distances from the runner's edges to the side railings or walls. Apply a generous layer of Stikatak Superspray Adhesive onto the carpet underlay, focusing on the tread and the riser just before laying the runner. Use the carpet laying tool to securely tuck the runner into the crease where the tread meets the riser, ensuring it hooks onto the gripper strips. Follow by using the staple gun (Tacwise 140 series) to firmly secure the runner along the sides and underneath the nosing, as shown. Continue rolling out the runner one step at a time, applying adhesive, tucking with the laying tool, and stapling, making sure the runner is consistently tugged tightly to avoid any looseness or wrinkles.
Goal: Lay and fasten the stair runner securely and centrally on the stairs
What's used
Tools
- Carpet Laying Tool
- Spacer Block
- Thick cardboard
- Staple Gun Tacwise 140 series
- Tape Measure Stanley
Materials
- Adhesive Spray Stikatak Superspray Adhesive
- Stair Runner Unknown (Herringbone pattern
- light color)
- Staples Tacwise 140 series (compatible)
About the full video
This project guides you through the process of installing a stair runner to enhance the aesthetic and safety of your staircase. It covers preparing the stairs, precisely cutting and securing gripper strips, laying down carpet underlay for cushioning, and finally, positioning and firmly attaching the stair runner using adhesive, a carpet laying tool, and a staple gun.
Step 5 of 5: Install Stair Treads/Runners (Option 2)
Follow the manufacturer's instructions for your chosen covering. This may involve adhering them directly to the stairs with double-sided tape or a strong adhesive, or using a staple gun for carpet runners. Ensure the covering is securely fastened and lies flat on each step, with no wrinkles or loose edges.
Every video in How to Protect Stairs from Dog Nail Scratches
Step 1: Inspect Stairs
- 0:00–0:53 Assess Damage & Prepare for Repair
Step 2: Clean Stairs
- 0:48–1:19 Cleaning and Edge Preparation
- 0:03–0:05 Clean Stairs with Detergent
- 0:54–2:44 Vacuum the Staircase
Step 3: Repair Minor Damage
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 4:13–4:24 Repair Wood Imperfections
- 9:35–10:24 Patch Holes and Imperfections with Filler
Step 4: Apply Protective Finish (Option 1)
- 1:07–1:12 Apply Protective Finish Sealer
- 2:19:00–2:24:00 Apply Protective Topcoat
- 19:45–20:00 Apply Protective Topcoat for Durability
Step 5: Install Stair Treads/Runners (Option 2)
- 0:27–0:47 Install and Secure the Stair Runner
- 2:27–3:42 Install Carpet Runner
- 0:58–1:50 Position and Secure Stair Runner (this video)
How to Protect Stairs from Dog Nail Scratches
Outline for protecting wooden stairs from dog nail scratches by applying a protective finish or covering.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

