Apply Protective Topcoat
From How to Protect Stairs from Dog Nail Scratches · Step 4 of 5 · Video by DIY Wife

Showing 2:19:00–2:24:00 of the source video. Watch the full video with every moment.
What happens in this clip
Once the wood stain has completely dried (refer to the stain manufacturer's instructions for drying times, typically 6-8 hours or overnight), apply a protective topcoat. The video implies the use of polyurethane, but any clear protective finish can be used. Apply the topcoat with a brush or applicator following the product's directions, ensuring thin, even coats. Allow each coat to dry thoroughly before applying subsequent coats. Lightly sand between coats with a fine-grit sandpaper (e.g., 220-grit) for a smoother finish, then wipe away dust before applying the next coat. Typically, 2-3 coats are recommended for optimal protection.
Goal: After the stain has dried, apply a protective topcoat to seal the wood and provide durability against wear and tear.
What's used
Tools
- Brush or Applicator
- Fine-grit Sandpaper (e.g.
- 220-grit)
Materials
- Polyurethane or Clear Protective Finish
- General Finishes Arm-R-Seal
- Lacquer
About the full video
This project details the process of revitalizing old wood surfaces by sanding them down and applying a fresh coat of wood stain, followed by a protective topcoat. The video demonstrates this process on an old octagonal table and a newly constructed plywood desktop, highlighting the preparation, application, and necessary precautions.
Step 4 of 5: Apply Protective Finish (Option 1)
If using a clear coat (like polyurethane or polycrylic), apply 2-3 thin, even coats according to the manufacturer's instructions, allowing adequate drying time between coats. If using a stain, apply it evenly with a brush or cloth, wipe off excess, and let it dry completely before applying a clear topcoat for added durability.
Every video in How to Protect Stairs from Dog Nail Scratches
Step 1: Inspect Stairs
- 0:00–0:53 Assess Damage & Prepare for Repair
Step 2: Clean Stairs
- 0:48–1:19 Cleaning and Edge Preparation
- 0:03–0:05 Clean Stairs with Detergent
- 0:54–2:44 Vacuum the Staircase
Step 3: Repair Minor Damage
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 4:13–4:24 Repair Wood Imperfections
- 9:35–10:24 Patch Holes and Imperfections with Filler
Step 4: Apply Protective Finish (Option 1)
- 1:07–1:12 Apply Protective Finish Sealer
- 2:19:00–2:24:00 Apply Protective Topcoat (this video)
- 19:45–20:00 Apply Protective Topcoat for Durability
Step 5: Install Stair Treads/Runners (Option 2)
- 0:27–0:47 Install and Secure the Stair Runner
- 2:27–3:42 Install Carpet Runner
- 0:58–1:50 Position and Secure Stair Runner
How to Protect Stairs from Dog Nail Scratches
Outline for protecting wooden stairs from dog nail scratches by applying a protective finish or covering.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

