Apply Protective Finish Sealer
From How to Protect Stairs from Dog Nail Scratches · Step 4 of 5 · Video by Today's Homeowner with Danny Lipford

Showing 1:07–1:12 of the source video. Watch the full video with every moment.
What happens in this clip
After the stain has completely dried according to the manufacturer's recommendations (this can take 8-24 hours), it's time to apply a protective topcoat. Choose a clear finish sealer like polyurethane, lacquer, or varnish. Apply the first coat thinly and evenly using a foam brush or a good quality natural bristle brush. Ensure full coverage without creating drips or puddles. Allow this coat to dry completely. Lightly sand the surface with very fine-grit sandpaper (e.g., 220 or 320 grit) between coats to ensure good adhesion and a smooth finish, then wipe off dust with a tack cloth. Apply two to three more coats, sanding lightly between each, to build up a durable protective layer. The final coat should be applied smoothly and left to cure fully before using the furniture.
Goal: Protect the stained wood with a durable topcoat
What's used
Tools
- Fine-Grit Sandpaper
- Finish Sealer (Polyurethane)
- Lacquer
- Shellac
- protective layer over the stained wood.
- Foam Brush
- Paint sprayer
- Tack Cloth
About the full video
This project guides you through the process of refinishing an old piece of wooden furniture, demonstrating how to remove existing finishes using chemical strippers, clean the surface, sand it smooth, apply a new stain, and finally protect it with a durable topcoat. The process emphasizes careful application and proper drying times to achieve a professional-looking result.
Step 4 of 5: Apply Protective Finish (Option 1)
If using a clear coat (like polyurethane or polycrylic), apply 2-3 thin, even coats according to the manufacturer's instructions, allowing adequate drying time between coats. If using a stain, apply it evenly with a brush or cloth, wipe off excess, and let it dry completely before applying a clear topcoat for added durability.
Every video in How to Protect Stairs from Dog Nail Scratches
Step 1: Inspect Stairs
- 0:00–0:53 Assess Damage & Prepare for Repair
Step 2: Clean Stairs
- 0:48–1:19 Cleaning and Edge Preparation
- 0:03–0:05 Clean Stairs with Detergent
- 0:54–2:44 Vacuum the Staircase
Step 3: Repair Minor Damage
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 4:13–4:24 Repair Wood Imperfections
- 9:35–10:24 Patch Holes and Imperfections with Filler
Step 4: Apply Protective Finish (Option 1)
- 1:07–1:12 Apply Protective Finish Sealer (this video)
- 2:19:00–2:24:00 Apply Protective Topcoat
- 19:45–20:00 Apply Protective Topcoat for Durability
Step 5: Install Stair Treads/Runners (Option 2)
- 0:27–0:47 Install and Secure the Stair Runner
- 2:27–3:42 Install Carpet Runner
- 0:58–1:50 Position and Secure Stair Runner
Questions about How to Protect Stairs from Dog Nail Scratches
Why is the estimated time for this beginner project 3 days?
The 3-day estimate primarily accounts for drying and curing times. Each coat of stain and protective topcoat needs adequate time to dry completely before applying the next layer or allowing foot traffic. Rushing these steps can lead to poor adhesion, uneven finish, or damage, requiring more repair time later.
What are the most important safety precautions when applying wood stains and protective finishes?
Always work in a well-ventilated area to avoid inhaling fumes; open windows and use fans. Wear appropriate personal protective equipment (PPE), including chemical-resistant gloves and safety glasses, to protect your skin and eyes. Ensure proper disposal of rags and materials saturated with oil-based products, as they can be a fire hazard.
How do I decide between applying a protective finish and installing stair treads or runners?
Consider aesthetics and functionality. A protective finish maintains the look of your wood, but ensure it's durable enough for pet traffic. Stair treads or runners offer superior grip, better scratch protection, and can be replaced if damaged, though they alter the visual appearance of your stairs. If your dog struggles with traction, treads are usually the better option.
What are common mistakes when applying a clear topcoat and how can I avoid them?
Common mistakes include applying too thick of a coat, which can cause bubbles or drips, and not properly cleaning the surface, leading to dust and debris trapped in the finish. To avoid these, apply several thin, even coats, allowing each to dry fully. Ensure the stairs are impeccably clean and tack-cloth wiped before each application.
What are the most essential tools for this project if I don't have everything listed?
A shop vacuum and soft scrub brush are crucial for thorough cleaning. Sandpaper of various grits is essential for surface prep. For applying finishes, a foam roller is highly recommended for smooth, even coats. If installing treads, a carpet knife and a stapler are necessary. A work light helps ensure you don't miss any spots during cleaning or application.
After applying a protective finish, my dog still slips or new scratches appear. What can I do?
If slipping is an issue, you can add an anti-slip additive to the final topcoat or consider applying adhesive-backed anti-slip strips directly to the finished stairs. For persistent scratching, the best solution might be to install carpet stair treads or a runner, as these provide a physical barrier that finishes alone sometimes can't match against very active dogs.
How to Protect Stairs from Dog Nail Scratches
Outline for protecting wooden stairs from dog nail scratches by applying a protective finish or covering.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

