Assess Damage & Prepare for Repair
From How to Protect Stairs from Dog Nail Scratches · Step 1 of 5 · Video by gregvancom

Showing 0:00–0:53 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by thoroughly inspecting the exterior stair structure. Identify any treads or risers that are loose, cracked, splintered, or show signs of rot. Note how the treads and risers are currently attached to the stringers (e.g., using wedges, nails, or other fasteners). The video highlights that original wedges often loosen, fall out, or become damaged, leading to instability. Determine if a full tread replacement is necessary, or if reinforcement of existing, salvable treads/risers is sufficient.
Goal: Examine the existing stair structure to identify loose, rotted, or damaged treads, risers, and stringers. Understand the current fastening method and prepare the area for replacement or reinforcement.
What's used
Tools
- Pry Bar
- Safety Gloves
About the full video
This guide provides various methods for repairing and reinforcing exterior stair treads, focusing on replacing damaged components with durable pressure-treated lumber. It covers techniques for reinforcing tread and riser connections, adding structural support, and using threaded rods to tighten the entire assembly, ensuring longevity and resistance to moisture and decay.
Step 1 of 5: Inspect Stairs
Examine each step for cracks, splinters, loose treads, or any other imperfections that could affect the application of a protective finish or covering. Note any areas that might need sanding or minor repairs.
Every video in How to Protect Stairs from Dog Nail Scratches
Step 1: Inspect Stairs
- 0:00–0:53 Assess Damage & Prepare for Repair (this video)
Step 2: Clean Stairs
- 0:48–1:19 Cleaning and Edge Preparation
- 0:03–0:05 Clean Stairs with Detergent
- 0:54–2:44 Vacuum the Staircase
Step 3: Repair Minor Damage
- 2:07–2:28 Minor Damage Repair with Wood Filler
- 4:13–4:24 Repair Wood Imperfections
- 9:35–10:24 Patch Holes and Imperfections with Filler
Step 4: Apply Protective Finish (Option 1)
- 1:07–1:12 Apply Protective Finish Sealer
- 2:19:00–2:24:00 Apply Protective Topcoat
- 19:45–20:00 Apply Protective Topcoat for Durability
Step 5: Install Stair Treads/Runners (Option 2)
- 0:27–0:47 Install and Secure the Stair Runner
- 2:27–3:42 Install Carpet Runner
- 0:58–1:50 Position and Secure Stair Runner
How to Protect Stairs from Dog Nail Scratches
Outline for protecting wooden stairs from dog nail scratches by applying a protective finish or covering.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

