powered by

Install and Secure the Stair Runner

From How to Protect Stairs from Dog Nail Scratches · Step 5 of 5 · Video by Thrift Diving (Serena Appiah)

Showing 0:27–0:47 of the source video. Watch the full video with every moment.

What happens in this clip

Starting from the top step (or bottom, depending on preference and pattern alignment), carefully unroll the stair runner. Align the runner precisely, ensuring it is centered and straight. For each step, press the runner down firmly onto the double-sided tape, working out any bubbles or wrinkles. Use a stair tool or the back of a utility knife to crease the runner into the angle between the tread and riser (if using the 'cap and band' method) or to smooth it over the bullnose (for 'waterfall' method). Ensure consistent tension across the runner for a uniform look. The video shows additional security with a pneumatic stapler, stapling into the riser and underneath the tread. While double-sided tape provides a damage-free hold, stapling can be used as an extra measure of security, particularly on the underside or back edge where staples won't be visible.

Goal: Carefully unroll and position the stair runner, pressing it firmly onto the double-sided tape on each tread and riser for a secure, damage-free installation. Trim excess as needed.

What's used

Tools

  • Air Compressor (Optional for extra security)
  • Pneumatic Stapler (Optional for extra security)
  • Scissors
  • Stair Tool (Optional)
  • Staples (Optional for extra security)
  • Utility Knife

Materials

  • Stair Runner

About the full video

This project details the process of installing a stair runner to enhance the aesthetic and safety of a staircase. It involves preparing the wooden stairs by sanding and painting, accurately measuring and templating for the runner, and then securely installing the runner using methods like double-sided tape for a clean, damage-free finish, with stapling shown as an alternative or for additional security.

Step 5 of 5: Install Stair Treads/Runners (Option 2)

Follow the manufacturer's instructions for your chosen covering. This may involve adhering them directly to the stairs with double-sided tape or a strong adhesive, or using a staple gun for carpet runners. Ensure the covering is securely fastened and lies flat on each step, with no wrinkles or loose edges.

Open this step in the guide

Every video in How to Protect Stairs from Dog Nail Scratches

  1. Step 1: Inspect Stairs

  2. Step 2: Clean Stairs

  3. Step 3: Repair Minor Damage

  4. Step 4: Apply Protective Finish (Option 1)

  5. Step 5: Install Stair Treads/Runners (Option 2)

How to Protect Stairs from Dog Nail Scratches

Outline for protecting wooden stairs from dog nail scratches by applying a protective finish or covering.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Install and Secure the Stair Runner — How to Protect Stairs from Dog Nail Scratches | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.