Measure and Cut Strips

What happens in this clip

To prepare the strip for application, unroll a section of the abrasive anti-slip strip and lay it out along the length of the stair tread. Align one end of the strip with the edge of the stair. Once the correct length is determined, use a pair of shears or heavy-duty scissors to cut the strip neatly to size. This custom cut ensures the strip covers the appropriate width of the tread without excess.

Goal: Cut the anti-slip strip to the correct length for one stair tread.

What's used

Tools

• Abrasive Anti-Slip Strip Unspecified
• Scissors Unspecified
• Box cutter

About the full video

This project provides instructions on how to install abrasive anti-slip strips on exterior stairs to prevent slips and falls. It involves selecting the right type of strip, measuring and cutting it to size, peeling off the adhesive backing, and carefully applying it to the stair treads.

Step 2 of 5: Measure and Cut Strips

For each stair tread, measure the width from edge to edge. Use a tape measure for accuracy. Transfer these measurements to your chosen edge strip material. Using a utility knife and a straight edge, carefully cut the strips to the exact length required for each tread. Ensure cuts are straight and clean.

Open this step in the guide

Every video in How to Add High-Contrast Edge Strips to Stairs for Low Vision

1. Step 1: Clean Stair Treads

   • 0:03–0:07 Prepare and Clean Stairs
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:18–0:31 Clean the Stairs

2. Step 2: Measure and Cut Strips

   • 0:02 Measure and Cut Anti-Slip Strip
   • 0:13–0:20 Measure and Cut Strips (this video)
   • 0:55–1:05 Measure and Cut First Tread

3. Step 3: Apply Adhesive

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:20–0:45 Peel and Adhere Strip
   • 2:32–3:24 Prepare Treads with Adhesive

4. Step 4: Install Edge Strips

   • 0:20–0:45 Peel and Adhere Strip
   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:10–0:13 Secure the First Tread

5. Step 5: Secure and Cure

   • 3:44–4:26 Final Curing and Caulking
   • 2:21–2:38 Complete Installation and Caulk Gaps
   • 3:06–3:19 Project Completion